Product Description
SPROCKET 1/2'' X 5/16'' 08B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 13.0mm | ||||
| Radius Width C | 1.3mm | ||||
| Tooth Width b1 | 7.0mm | ||||
| Tooth Width B1 | 7.2mm | ||||
| Tooth Width B2 | 21.0mm | ||||
| Tooth Width B3 | 34.9mm | ||||
| 08B SERIES ROLLER CHAINS | |||||
| Pitch | 12.7 mm | ||||
| Internal Width | 7.75 mm | ||||
| Roller Diameter | 8.51 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 37.2 | 33.18 | 8 | 10 | 10 |
| 9 | 41.0 | 37.13 | 8 | 10 | 10 |
| 10 | 45.2 | 41.10 | 8 | 10 | 10 |
| 11 | 48.7 | 45.07 | 10 | 10 | 12 |
| 12 | 53.0 | 49.07 | 10 | 10 | 12 |
| 13 | 57.4 | 53.06 | 10 | 10 | 12 |
| 14 | 61.8 | 57.07 | 10 | 10 | 12 |
| 15 | 65.5 | 61.09 | 10 | 10 | 12 |
| 16 | 69.5 | 65.10 | 10 | 12 | 16 |
| 17 | 73.6 | 69.11 | 10 | 12 | 16 |
| 18 | 77.8 | 73.14 | 10 | 12 | 16 |
| 19 | 81.7 | 77.16 | 10 | 12 | 16 |
| 20 | 85.8 | 81.19 | 10 | 12 | 16 |
| 21 | 89.7 | 85.22 | 12 | 16 | 16 |
| 22 | 93.8 | 89.24 | 12 | 16 | 16 |
| 23 | 98.2 | 93.27 | 12 | 16 | 16 |
| 24 | 101.8 | 97.29 | 12 | 16 | 16 |
| 25 | 105.8 | 101.33 | 12 | 16 | 16 |
| 26 | 110.0 | 105.36 | 16 | 16 | 16 |
| 27 | 114.0 | 109.40 | 16 | 16 | 16 |
| 28 | 118.0 | 113.42 | 16 | 16 | 16 |
| 29 | 122.0 | 117.46 | 16 | 16 | 16 |
| 30 | 126.1 | 121.50 | 16 | 16 | 16 |
| 31 | 130.2 | 125.54 | 16 | 16 | 20 |
| 32 | 134.3 | 129.56 | 16 | 16 | 20 |
| 33 | 138.4 | 133.60 | 16 | 16 | 20 |
| 34 | 142.6 | 137.64 | 16 | 16 | 20 |
| 35 | 146.7 | 141.68 | 16 | 16 | 20 |
| 36 | 151.0 | 145.72 | 16 | 20 | 20 |
| 37 | 154.6 | 149.76 | 16 | 20 | 20 |
| 38 | 158.6 | 153.80 | 16 | 20 | 20 |
| 39 | 162.7 | 157.83 | 16 | 20 | 20 |
| 40 | 166.8 | 161.87 | 16 | 20 | 20 |
| 41 | 171.4 | 165.91 | 20 | 20 | 25 |
| 42 | 175.4 | 169.94 | 20 | 20 | 25 |
| 43 | 179.7 | 173.98 | 20 | 20 | 25 |
| 44 | 183.8 | 178.02 | 20 | 20 | 25 |
| 45 | 188.0 | 182.07 | 20 | 20 | 25 |
| 46 | 192.1 | 186.10 | 20 | 20 | 25 |
| 47 | 196.2 | 190.14 | 20 | 20 | 25 |
| 48 | 200.3 | 194.18 | 20 | 20 | 25 |
| 49 | 204.3 | 198.22 | 20 | 20 | 25 |
| 50 | 208.3 | 202.26 | 20 | 20 | 25 |
| 51 | 212.1 | 206.30 | 20 | 25 | 25 |
| 52 | 216.1 | 210.34 | 20 | 25 | 25 |
| 53 | 220.2 | 214.37 | 20 | 25 | 25 |
| 54 | 224.1 | 218.43 | 20 | 25 | 25 |
| 55 | 228.1 | 222.46 | 20 | 25 | 25 |
| 56 | 232.2 | 226.50 | 20 | 25 | 25 |
| 57 | 236.4 | 230.54 | 20 | 25 | 25 |
| 58 | 240.5 | 234.58 | 20 | 25 | 25 |
| 59 | 244.5 | 238.62 | 20 | 25 | 25 |
| 60 | 248.6 | 242.66 | 20 | 25 | 25 |
| 62 | 256.9 | 250.74 | 25 | 25 | 25 |
| 64 | 265.1 | 258.82 | 25 | 25 | 25 |
| 65 | 269.0 | 262.86 | 25 | 25 | 25 |
| 66 | 273.0 | 266.91 | 25 | 25 | 25 |
| 68 | 281.0 | 274.99 | 25 | 25 | 25 |
| 70 | 289.0 | 283.07 | 25 | 25 | 25 |
| 72 | 297.2 | 291.15 | 25 | 25 | 25 |
| 75 | 309.2 | 303.28 | 25 | 25 | 25 |
| 76 | 313.2 | 307.32 | 25 | 25 | 25 |
| 78 | 321.4 | 315.40 | 25 | 25 | 25 |
| 80 | 329.4 | 323.49 | 25 | 25 | 25 |
| 85 | 349.0 | 343.69 | 25 | 25 | 25 |
| 90 | 369.9 | 363.90 | 25 | 25 | 25 |
| 95 | 390.1 | 384.11 | 25 | 25 | 25 |
| 100 | 410.3 | 404.32 | 25 | 25 | 25 |
| 110 | 450.7 | 444.74 | 25 | 25 | 25 |
| 114 | 466.9 | 460.91 | 25 | 25 | 25 |
| 120 | 491.2 | 485.16 | 25 | 25 | 25 |
| 125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
|
Type: |
Simplex, Duplex, Triplex |
|
Sprocket Model: |
3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3" |
|
Teeth Number: |
9-100 |
|
Standard: |
ANSI , JIS, DIN, ISO |
|
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
|
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
|
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
|
Certification: |
ISO9001 SGS |
|
Quality Inspection: |
Self-check and Final-check |
|
Sample: |
ODM&OEM, Trial Order Available and Welcome |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An "H" following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, "10 speed chain". Hub gear or single speed bicycles use 1/2" x 1/8" chains, where 1/8" refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface, Hardened Tooth Surface |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can sprocket gears be used for vertical power transmission?
Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.
The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.
Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:
1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.
2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.
3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.
4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.
When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.
Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain's components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer's guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
What are the different types of sprocket gears and their applications?
Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:
- 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
- 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
- 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
- 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
- 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
- 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
- 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.
The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.
editor by Dream 2024-05-15
China OEM Customized Gear Rack Bevel Gear Sprocket Chain Coupling Worm Synchronous Gear Brass Worm Wheels Gear for Transmission Parts
Product Description
Item:Customized gear rack bevel gear sprocket chain coupling worm synchronous gear Brass Worm Wheels Gear for Transmission Parts
1. High degree of automation and high production efficiency;
2. Strong adaptability to CNC machining objects. When changing the processing object, in addition to replacing and solving the blank clamping mode, it only needs to be reprogrammed;
3. High machining precision and stable quality. The machining dimensional accuracy is between 0.005 ~ 0.01 mm, which is not affected by the complexity of parts;
Parameter :
| Item | Customized gear rack bevel gear sprocket chain coupling worm synchronous gear Brass Worm Wheels Gear for Transmission Parts |
| Weight | Customized |
| Dimension | Customized |
| Material | Aluminum alloy(6063 T5,6061,5052,7075,1060...),Stainless steel(316L,304,303...),Copper,Brass,Bronze,Carbon steel,PET,POM,Nylon... |
| Machined Technology | 3,4,5 Axis CNC Machining,CNC Milling,CNC Turning,Laser Cutting,Die Casting,Cold forging,Aluminum Extrusion,Sheet Metal Fabrication,Stamping,Welding,Friction Stir Welding,Assembling. |
| Surface Treatment | Anodizing,Painting,Powder Coating,electrophoresis,Passivation,Sand Blasting,Plating,Blackening,Polishing... |
| Tolerance | ±0.01MM |
| Application | Electronic products body ,Telecom Chasis,Cover,aerospace structure parts,heat sink,aluminum cooling plate,gear&shaft,bearing,high speed feed through,other OEM/ODM customized machining parts |
Our advantage:
1. Experienced engineering team;
2. Full process QC inspection, complete quality system before, during and after processing;
3. Efficient and rapid response, benign interaction between business and production, and accurately grasp customer requirements;
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be used for vertical power transmission?
Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.
The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.
Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:
1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.
2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.
3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.
4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.
When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.
Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.
Can sprocket gears be used in precision motion control systems?
Yes, sprocket gears can be used in precision motion control systems, but there are some considerations to keep in mind. Precision motion control systems require high accuracy, repeatability, and low backlash to achieve precise positioning and movement. Sprocket gears can meet these requirements under certain conditions:
1. Quality Manufacturing: To ensure precision, sprocket gears used in motion control systems must be of high quality and precision-manufactured. They should have accurate tooth profiles and minimal manufacturing defects.
2. Tight Tolerances: Precision motion control systems require sprocket gears with tight tolerances to minimize variations in tooth engagement. This ensures consistent motion and positioning.
3. Low Backlash: Backlash is the amount of clearance between engaged teeth, and it can cause positioning errors in motion control systems. High-quality sprocket gears with proper installation and alignment can help reduce backlash.
4. Proper Lubrication: Lubrication is critical for reducing friction and wear in precision motion control systems. Using the right lubricant in the right amount is essential for smooth and accurate operation.
5. Alignment and Maintenance: Proper alignment during installation and regular maintenance are crucial for preserving the precision of the sprocket gear system. Misalignment or wear can compromise the system's accuracy.
It's important to select sprocket gears that match the specific requirements of the motion control application. While sprocket gears can work well in precision motion control systems, some applications may benefit from other types of gearing systems, such as gear racks or timing belts, depending on the complexity and demands of the motion control task.
Before integrating sprocket gears into a precision motion control system, it's advisable to consult with engineers or experts familiar with both the application's requirements and the capabilities of sprocket gear systems. This will ensure that the selected gearing solution is optimized for precision and reliability in the motion control application.
What are the different types of sprocket gears and their applications?
Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:
- 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
- 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
- 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
- 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
- 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
- 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
- 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.
The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.
editor by Dream 2024-05-07
China OEM Standard Carbon Steel Spur Gear Sprocket From China Manufacturer
Product Description
Standard carbon steel spur gear from from China manufacturer SCS
With more than 20 years' experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.
Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Forging Parts |
| Material: | 45# Steel |
| Teeth: | 9t-120t |
| Samples: |
US$ 9.99/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be customized for specific machinery or equipment?
Yes, sprocket gears can be customized for specific machinery or equipment. Customization of sprocket gears allows manufacturers and engineers to tailor the design and specifications to meet the unique requirements of a particular application. Here are some key points about the customization of sprocket gears:
1. Size and Pitch: Sprocket gears can be customized in terms of their size, number of teeth, and pitch to match the specific speed ratio and torque requirements of the machinery. Different applications may demand different gear ratios, and customization allows for the optimization of performance.
2. Material: The choice of material for sprocket gears can be customized based on factors such as load capacity, environmental conditions, and the application's operating temperature. Common materials used for sprocket gears include steel, stainless steel, cast iron, and various alloys.
3. Mounting Options: Customized sprocket gears can be designed to accommodate various mounting options, such as shaft mounting, hub mounting, or using a taper lock bushing system, depending on the specific requirements of the machinery.
4. Keyways and Set Screw Holes: Sprocket gears can be customized with keyways or set screw holes to ensure a secure and reliable connection with the shaft. The choice of mounting method depends on the application and the torque transmitted.
5. Bearing Support: In some cases, sprocket gears may require additional bearing support to handle radial loads effectively. Customization allows engineers to integrate the appropriate bearing support into the design.
6. Special Coatings or Treatments: Depending on the application's environment, sprocket gears can be customized with special coatings or treatments to enhance corrosion resistance, reduce friction, or increase wear resistance.
7. Compliance with Standards: Customized sprocket gears can be designed to comply with specific industry standards or regulations, ensuring the equipment's safety and performance.
By customizing sprocket gears, manufacturers can create reliable and efficient power transmission solutions that meet the exact needs of their machinery or equipment. This level of customization helps optimize performance, minimize maintenance, and improve the overall lifespan of the equipment.
Can sprocket gears be used in robotics and automation?
Yes, sprocket gears are commonly used in robotics and automation applications due to their versatility, efficiency, and ability to transmit power between parallel shafts. They offer several advantages that make them suitable for various robotic and automation systems:
1. Power Transmission: Sprocket gears are excellent for power transmission in robotics and automation. They allow precise control over the motion and speed of robotic components, making them ideal for tasks that require accurate positioning and timing.
2. High Efficiency: The meshing of teeth between the sprocket gear and the chain results in minimal friction, providing high mechanical efficiency. This is crucial for energy-efficient operation, especially in battery-powered robots or automation systems.
3. Compact Design: Sprocket gear systems are compact and can be integrated into the limited space of robotic joints and other mechanisms. They offer a lightweight solution without compromising strength and durability.
4. Low Noise: When properly lubricated and maintained, sprocket gears produce minimal noise during operation, contributing to quieter robotic and automation systems.
5. High Load-Carrying Capacity: Sprocket gears can handle significant loads, making them suitable for various robotic applications, including heavy lifting, material handling, and industrial automation.
6. Precise Positioning: Sprocket gears enable accurate positioning, which is essential in tasks that require repetitive and precise movements, such as pick-and-place operations and assembly tasks.
7. Easy Customization: Sprocket gears are available in various sizes, types, and materials, allowing for easy customization to meet specific robotic and automation requirements.
8. Reliability: With proper maintenance, sprocket gear systems can provide long-lasting and reliable performance, reducing downtime and maintenance costs in robotic and automation applications.
Overall, sprocket gears play a vital role in the design and operation of robotic systems, enabling precise motion control, high efficiency, and reliable power transmission. Their versatility makes them a popular choice in a wide range of robotic and automation applications across industries.
What is a sprocket gear, and how does it function in a mechanical system?
A sprocket gear is a toothed wheel with evenly spaced teeth that mesh with a chain, track, or another perforated material. It is an essential component in mechanical systems where rotary motion needs to be transmitted from one shaft to another. Sprocket gears are commonly used in various applications, including bicycles, motorcycles, conveyor systems, and industrial machinery.
Here's how a sprocket gear functions in a mechanical system:
- Power Transmission: The primary function of a sprocket gear is to transfer rotational motion and power from one shaft to another. When a rotational force (torque) is applied to the input shaft, the teeth of the sprocket engage with the links of the chain. As the input shaft rotates, the chain moves along with it, causing the output shaft connected to the other sprocket to rotate as well.
- Gear Ratio: The number of teeth on the sprocket gears determines the gear ratio, which defines the speed and torque relationship between the input and output shafts. A larger sprocket with more teeth results in higher torque and lower speed, while a smaller sprocket with fewer teeth provides higher speed and lower torque.
- Speed and Torque Conversion: Sprocket gears enable the conversion of speed and torque between shafts. By selecting different sprocket sizes, mechanical systems can achieve the desired balance of speed and torque for their specific applications. This is especially useful in scenarios where the input and output shafts need to rotate at different speeds or generate different levels of force.
- Directional Change: In some applications, sprocket gears can also change the direction of rotation. By using multiple sprockets and a chain, mechanical systems can transfer power around corners or between non-parallel shafts.
- Chain Engagement: The teeth on the sprocket gear are designed to mesh precisely with the links of the chain, ensuring a positive engagement. This allows for a reliable transfer of motion and power, preventing slippage and ensuring efficient operation.
- Noise and Vibration Damping: Sprocket gears with well-machined teeth and proper lubrication can reduce noise and vibration in mechanical systems, leading to smoother and quieter operation.
Overall, sprocket gears play a critical role in power transmission systems, providing a simple and effective means of transferring motion and energy between rotating shafts. Their versatility and efficiency make them indispensable components in various mechanical applications.
editor by Dream 2024-04-24
China OEM CZPT Precision Industrial Steel Chain Drive Sprocket Gear with Forging Machinery Part
Product Description
IHF Precision Industrial Steel Chain Drive Sprocket Gear With Forging Machinery Part
Main Features:
Helical Gear
1. Produce strictly in accordance with ANSI or DIN standard dimension
2. Material: 1045 Carbon Steel
3. Bore: Finished bore
4. Module: 1~3
Product Parameters
| Product name | Chain Wheel / Sprocket Wheel |
| Materials Available | Stainless Steel, Carbon Steel, Brass, Bronze, Iron, Aluminum Alloy,Copper,Plastic etc |
| Heat Treatment | Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding...... |
| Surface Treatment | Carburizing and Quenching,Tempering ,Tooth suface high quenching Hardening,Tempering |
| BORE | Finished bore, Pilot Bore, Special request |
| Processing Method | Molding, Shaving, Hobbing, Drilling, Tapping, Reaming, Manual Chamfering, Grinding etc |
| Pressure Angle | 20 Degree |
| Hardness | 55- 60HRC |
| Size | Customer Drawings & ISO standard |
| Package | Wooden Case/Container and pallet, or made-to-order |
| Certificate | ISO9001:2008 |
| Applications | Electric machinery, metallurgical machinery, environmental protection machinery, electronic and electrical appliances, road construction machinery, chemical machinery, food machinery, light industrial machinery, mining machinery, transportation machinery, construction machinery, building materials machinery, cement machinery, rubber machinery, water conservancy machinery and petroleum machinery |
| Machining Process | Blanking, lathe, heat treatment(Conditioning),Gear hobbing,Line cutting,Wire cutting,Milling machine,Heat treatment (tooth surface quenching),finished product inspection |
| Advantages | 1. Produce strictly in accordance with ANSI or DIN standard dimension 2. Material: SCM 415 steel 3. Bore: Finished bore 4. Precision grade: DIN 5 to DIN 7 5. Surface treatment: Carburizing and Quenching 6. Module: From 1 to 4 7. Tooth: From Z15 to Z70 |
Specifction:
| Number | Number of Teeth | Shaft Bore Dia. AH7 (1mm Increment) | Twisting Direction | B | C | D | E | F | G | ||
| Type | Module | Straight Bore Straight Bore+Tap | Keyway+Tap | ||||||||
| Straight Bore
Straight Bore+Tap Keyway+Tap |
1.0 | 20 | 6 | 8 | L(Left)
R(Right) |
17 | 20 | 22 | 8 | 10 | 18 |
| 22~ 28 | 8 | 8~13 | 18~20 | 22~28 | 24~30 | ||||||
| 30~48 | 10 | 10~17 | 25~30 | 30~48 | 32~50 | ||||||
| 50~70 | 12 | 12~17 | 35~40 | 50~70 | 52~72 | ||||||
| 80~100 | 15 | 15~30 | 50 | 80~100 | 82~102 | ||||||
| 1.5 | 20~26 | 12 | 12~17 | 24~32 | 30~39 | 33~42 | 12 | 12 | 24 | ||
| 28~44 | 15 | 15~30 | 36~50 | 42~67.5 | 45~70.5 | ||||||
| 45~52 | 18 | 18~40 | 50~60 | 72~78 | 75~81 | ||||||
| 60~100 | 20 | 20-50 | 60~70 | 90~150 | 93·153 | ||||||
| 2.0 | 15~18 | 12 | 12~17 | 24~30 | 30~36 | 34~40 | 16 | 13 | 29 | ||
| 20~28 | 15 | 15·22 | 32~45 | 40~56 | 44~60 | ||||||
| 30~36 | 18 | 18~40 | 50 | 60~72 | 64~76 | ||||||
| 40~48 | 20 | 20~44 | 60 | 80~96 | 84~100 | ||||||
| 50~100 | 25 | 25~60 | 60~100 | 100~200 | 104~204 | ||||||
| 2.5 | 15~18 | 15 | 15~30 | 30~38 | 37.5~45 | 42.5~50 | 20 | 14 | 34 | ||
| 20~24 | 18 | 18~40 | 40~48 | 50~60 | 55~65 | ||||||
| 25~36 | 20 | 20~50 | 50~70 | 62.5~90 | 67.5~95 | ||||||
| 40~60 | 25 | 25~70 | 70~80 | 90~150 | 95~155 | ||||||
| 3.0 | 15~18 | 18 | 18~22 | 36~40 | 45~54 | 51~60 | 25 | 16 | 4 | ||
Company Profile
Packaging & Shipping
FAQ
| Main Markets? | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
| How to order? | * You send us drawing or sample |
| * We carry through project assessment | |
| * We give you our design for your confirmation | |
| * We make the sample and send it to you after you confirmed our design | |
| * You confirm the sample then place an order and pay us 30% deposit | |
| * We start producing | |
| * When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
| * Trade is done, thank you!! |
If you are interested in our products, please tell us which materials, type, width, length u want.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Warranty: | One Year |
|---|---|
| Condition: | New |
| Certification: | RoHS, ISO9001 |
| Standard: | DIN, GB, JIS, Agma |
| Customized: | Customized |
| Material: | Stainless Steel |
| Samples: |
US$ 15/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do I properly install and align sprocket gears?
Proper installation and alignment of sprocket gears are crucial to ensure smooth and efficient power transmission and to prevent premature wear. Here are the steps to properly install and align sprocket gears:
1. Gather the Required Tools:
Before starting the installation process, gather all the necessary tools, including a torque wrench, measuring tools (calipers or micrometers), leveling tools, and alignment tools.
2. Clean the Components:
Thoroughly clean the sprocket gears and the shafts on which they will be mounted. Remove any dirt, debris, or old lubricant to ensure proper contact between the components.
3. Check for Damage:
Inspect the sprocket gears for any signs of damage, wear, or deformation. If any issues are found, replace the damaged components before proceeding.
4. Ensure Proper Fit:
Ensure that the bore diameter of the sprocket gear matches the diameter of the shaft on which it will be mounted. The fit should be neither too loose nor too tight, and the keyway (if present) should align properly with the key on the shaft.
5. Align Sprocket Gears:
For chain and sprocket systems, align the sprocket gears precisely with each other. The teeth of the driving and driven sprockets should mesh smoothly with the chain. For belt drive systems, ensure the sprocket gears align with each other and the belt tracks properly within the sprockets.
6. Check Axial Alignment:
Ensure that the sprocket gears are axially aligned with each other and perpendicular to their respective shafts. Any misalignment can cause premature wear and noise during operation.
7. Set Tension:
If using a chain and sprocket system, adjust the tension of the chain to the manufacturer's specifications. Proper tension ensures optimal power transmission and extends the life of both the chain and sprocket gears.
8. Lubricate:
Apply the appropriate lubricant to the sprocket gear teeth and the chain or belt as required. Lubrication reduces friction, heat, and wear during operation.
9. Torque Fasteners:
If the sprocket gears are held in place with fasteners (such as set screws or bolts), torque them to the recommended specifications. This ensures that the sprocket gears are securely attached to the shafts and will not slip during operation.
10. Perform a Trial Run:
After installation, run the system at low speed and observe its performance. Check for any unusual noise, vibration, or misalignment. If any issues are detected, stop the system immediately and address the problem.
Following these steps will help ensure that the sprocket gears are properly installed and aligned, leading to reliable and efficient power transmission in your mechanical system.
How do I calculate the pitch circle diameter for a sprocket gear system?
Calculating the pitch circle diameter is essential when designing or working with a sprocket gear system. The pitch circle diameter (PCD) represents the circle on which the centers of the sprocket teeth lie. To calculate the pitch circle diameter, you'll need to know the number of teeth on the sprocket and the pitch diameter.
Step 1: Determine the Number of Teeth (N): Count the total number of teeth on the sprocket. This value is denoted as 'N'.
Step 2: Find the Pitch Diameter (PD): The pitch diameter is the diameter of the pitch circle on which the teeth are located. If you already have the pitch diameter provided, proceed to the next step. Otherwise, you can calculate the pitch diameter using the formula:
PD = N / (DP * π)
Where:
PD = Pitch Diameter
N = Number of Teeth
DP = Diametral Pitch (teeth per inch)
π (Pi) = 3.14159 (approximately)
Step 3: Calculate the Pitch Circle Diameter (PCD): The pitch circle diameter can be calculated using the following formula:
PCD = PD * cos(180° / N)
Where:
PCD = Pitch Circle Diameter
PD = Pitch Diameter (calculated in Step 2)
N = Number of Teeth
The resulting value of the pitch circle diameter will help you in various aspects of sprocket gear system design and analysis, such as determining the center distance between two sprockets or matching the sprocket with a compatible chain.
Remember that accurate measurements and precise calculations are crucial for successful sprocket gear system performance. If you are unsure about the calculations or dealing with complex sprocket configurations, consulting with a qualified engineer or using specialized software can be beneficial.
Are there any eco-friendly materials used in manufacturing sprocket gears?
Yes, there are eco-friendly materials used in manufacturing sprocket gears. As industries increasingly prioritize sustainability and environmental consciousness, manufacturers have developed alternative materials that reduce the ecological impact of sprocket gear production. Some eco-friendly materials commonly used in sprocket gear manufacturing include:
- Bio-Based Plastics: Certain sprocket gears are now made from bio-based plastics, which are derived from renewable resources like plant-based polymers. These plastics offer similar performance to traditional materials while being more sustainable and biodegradable.
- Recycled Metals: Sprocket gears can be manufactured using recycled metals, such as recycled steel or aluminum. Recycling metals helps conserve natural resources and reduces energy consumption during the manufacturing process.
- Biodegradable Lubricants: While not a direct material for sprocket gears, using biodegradable lubricants for sprocket gear systems can contribute to environmental sustainability. These lubricants break down more easily in the environment, reducing pollution risks.
- Composite Materials: Composite materials that combine natural fibers with resins or polymers are being explored for sprocket gear applications. These composites can be more eco-friendly due to their renewable content.
It's important to note that the specific materials used in sprocket gear manufacturing may vary depending on the application, load requirements, and environmental conditions. Manufacturers and end-users should consider factors like performance, durability, and cost-effectiveness alongside the eco-friendliness of the materials when choosing the right sprocket gear for their needs.
editor by Dream 2024-04-24
China OEM AISI 4140 Mining Excavator Large Steel Forged Big Segment Large Sprocket CZPT Chain Wheel Gear
Product Description
Key attributes
Other attributes
Applicable Industries
Manufacturing Plant, Machinery Repair Shops, Energy & Mining
Weight (KG)
1650
Showroom Location
None
Video outgoing-inspection
Provided
Machinery Test Report
Provided
Marketing Type
Hot Product 2571
Warranty of core components
1 Year
Core Components
Gear
Place of CZPT
ZheJiang , China
Condition
New
Warranty
1.5 years
Shape
Ring Gear
Standard or Nonstandard
Nonstandard
Tooth Profile
Spur
Material
Steel
Processing
Casting
Pressure Angle
20°
Brand Name
HangZhou
Product Name
custom large diameter alloy steel spur casting large ring gear
Application
Cement kiln
Gear Machining
Gear milling
Module of Gear:
8-120
OD For Gear Wheel:
MAX.13 000 mm
Height For CZPT
MAX. 1200 mm
Certificate
ISO 9001:2015
Tolerance
+/-0.01mm
Heat treatment
QT
Surface Treatment
Surface Hardening or Carburizing and Quenching
Packaging and delivery
Packaging Details
Package for Cement kiln custom large diameter ring gear transmission alloy steel spur casting large ring gear is wooden box and adapts to CZPT transport
Port
ZheJiang ,HangZhou or Others
Supply Ability
Supply Ability
9000 Ton/Tons per Year
OUR WORKSHOPS
OUR EQUIPMENTS
Technology Process
|
Material |
Carbon steel,Alloy steel |
||
|
Structure |
Forging,casting |
||
|
Type of gear |
spur gear,helical gear,Planetary Gear |
||
|
Heat treatment |
Quenching and tempering |
||
|
Process |
forging, rough machining, QT, finish machining |
||
|
Main equipments |
hobbing,CNC machine |
||
|
Module |
up to 200 |
||
|
Precision of gear |
Grinding ISO Grade 5-7 & Hobbing ISO Grade 8-9 |
||
|
Inspection |
Raw material inspection, UT,physical property test,dimension inspect |
||
|
Application |
Mining machinery, mill, kiln and other equipment |
||
OUR CERTIFICATE
OUR CUSTOMER FEEDBACK
CONTACT
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industry |
|---|---|
| Hardness: | Hb190-Hb300 |
| Gear Position: | External Gear |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do I calculate the required torque for a sprocket gear setup?
Calculating the required torque for a sprocket gear setup involves considering several factors that influence the torque demand in the system. Here's a step-by-step guide on how to calculate the required torque:
Step 1: Determine the Load: Identify the load or resistance that the sprocket gear setup needs to overcome. This could be the weight of the object being lifted, the force required to move a conveyor belt, or any other application-specific load.
Step 2: Calculate the Torque to Overcome Friction: The sprocket gear system experiences friction losses that must be accounted for in the torque calculation. Frictional torque can be estimated based on the type of bearings used, lubrication, and other factors.
Step 3: Account for Efficiency: No mechanical system is 100% efficient, and some power will be lost due to factors like friction and heat. Take the system's efficiency into account when calculating the required torque.
Step 4: Determine Speed and Angular Velocity: The speed at which the sprocket gear system operates and the angular velocity of the driven sprocket are essential for torque calculation.
Step 5: Use the Torque Calculation Formula: The torque (T) required to drive the sprocket gear system can be calculated using the formula:
T = (Load × Distance) ÷ (2π × Speed)
Where:
Load = Load or resistance on the system (in Newtons, N)
Distance = Radius or effective radius of the driven sprocket (in meters, m)
Speed = Angular speed of the driven sprocket (in radians per second, rad/s)
Step 6: Apply Safety Factor: In real-world applications, it's essential to apply a safety factor to the calculated torque to account for unexpected overloads or variations in the system's performance.
Step 7: Select the Motor or Power Source: Once you have the calculated required torque, choose a motor or power source that can deliver the necessary torque while considering factors like the motor's torque-speed curve and duty cycle.
Keep in mind that sprocket gear systems might have multiple stages with different gear ratios, so the torque calculation might vary for each stage. Additionally, consult with a mechanical engineer or specialist for critical applications or complex setups to ensure accurate torque calculations.
How do I calculate the pitch circle diameter for a sprocket gear system?
Calculating the pitch circle diameter is essential when designing or working with a sprocket gear system. The pitch circle diameter (PCD) represents the circle on which the centers of the sprocket teeth lie. To calculate the pitch circle diameter, you'll need to know the number of teeth on the sprocket and the pitch diameter.
Step 1: Determine the Number of Teeth (N): Count the total number of teeth on the sprocket. This value is denoted as 'N'.
Step 2: Find the Pitch Diameter (PD): The pitch diameter is the diameter of the pitch circle on which the teeth are located. If you already have the pitch diameter provided, proceed to the next step. Otherwise, you can calculate the pitch diameter using the formula:
PD = N / (DP * π)
Where:
PD = Pitch Diameter
N = Number of Teeth
DP = Diametral Pitch (teeth per inch)
π (Pi) = 3.14159 (approximately)
Step 3: Calculate the Pitch Circle Diameter (PCD): The pitch circle diameter can be calculated using the following formula:
PCD = PD * cos(180° / N)
Where:
PCD = Pitch Circle Diameter
PD = Pitch Diameter (calculated in Step 2)
N = Number of Teeth
The resulting value of the pitch circle diameter will help you in various aspects of sprocket gear system design and analysis, such as determining the center distance between two sprockets or matching the sprocket with a compatible chain.
Remember that accurate measurements and precise calculations are crucial for successful sprocket gear system performance. If you are unsure about the calculations or dealing with complex sprocket configurations, consulting with a qualified engineer or using specialized software can be beneficial.
Can you explain the working principle of a sprocket gear transmission?
A sprocket gear transmission is a type of power transmission system that uses sprockets and a chain or a belt to transfer rotational motion and power between two or more shafts. The working principle of a sprocket gear transmission involves the following key steps:
- Input Shaft: The power input is provided to one of the sprockets, which is mounted on an input shaft. This can be a motor, engine, or any other rotational power source.
- Teeth Engagement: The sprockets have evenly spaced teeth that engage with the links of the chain or the teeth of the belt. As the input shaft rotates, it drives the chain or belt by engaging with these teeth.
- Chain or Belt Movement: As the input shaft rotates, it causes the chain or belt to move along the sprockets. The chain or belt wraps around the circumference of the sprockets, and the teeth of the sprockets mesh with the links of the chain or the teeth of the belt.
- Output Shaft: On the other end of the chain or belt, there is another sprocket mounted on the output shaft. As the chain or belt moves and wraps around the output sprocket, it causes the output shaft to rotate.
- Power Transfer: The rotational motion and power from the input shaft are transferred to the output shaft through the chain or belt and the sprockets. The gear ratio between the input and output sprockets determines the speed and torque relationship between the two shafts.
Sprocket gear transmissions are widely used in various applications due to their efficiency, reliability, and ability to transmit power over long distances. They are commonly found in bicycles, motorcycles, industrial machinery, conveyor systems, and many other mechanical systems.
editor by CX 2024-04-15
China OEM Wholesale Car Spare Parts Auto Part Vvt Timing Sprocket Gear for CZPT Previa RAV4 Alphard Es350 Highlander Aurion Camry 2gr 13050-31170
Product Description
Product Description
Manufacturer Auto Spare Parts Car Suspension parts Electrical parts Body parts Engine parts and Accessories for CZPT Vios Yaris Corolla Fortuner Hilux CZPT Hiace LandCruiser Coster 4Runner Highlander Camry etc.
Specification:
Engine System Parts
| Description | VVT Timing Sprocket Gear For Toyota Previa RAV4 Alphard ES350 Highlander Aurion Camry |
| OEM Number | 13050-31170 |
| Model | For CZPT 2GR |
| Delivery Time | 1. 5-7days With Stock 2. 25-40days Mass Production |
| Payment | T/T , Western Union , Paypal , L/C , Cash |
| Shippment | DHL, Fedex,TNT,UPS, By Sea, By Air. |
| Warranty | 12 Months |
| Certificate | ISO9001,TS16949 |
| Package | Standard |
please:
If you are unsure about this part fitting your vehicle then please send us your vehicle reg or full chassis number so we can check and be sure before purchasing.
feel free to contact us to get more information about the products or the price.
Welcome to Consult.
FAQ:
1.Where is your company? Which parts do you mainly sell?
Q:Our company is located in HangZhou,ZheJiang Province,Specilized in CZPT parts
2.How many kinds of products do you have?
A: We have more than 10000+ products for Engine/Suspension/Electrical/Body parts and accessories.
3.What's the Warranty?
A:Mainly 12 months.
4.What's the MOQ?
A:The MOQ corresponding to each product and it can be consulted.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Certification: | TS16949 |
| Warranty: | 12 Months |
| Engine Type: | Gasoline |
| Material: | Forged Steel |
| Transport Package: | Neutral |
| Samples: |
US$ 50/Set
1 Set(Min.Order) | |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer's Instructions: Adhere to the manufacturer's guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain's components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer's guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
How do I calculate the gear ratio for a sprocket gear system?
Calculating the gear ratio for a sprocket gear system is essential for understanding how the rotational speed and torque are transmitted between the driving and driven sprockets. The gear ratio (GR) is a measure of the speed and torque multiplication or reduction between the two sprockets.
The gear ratio is determined by the ratio of the number of teeth on the driving sprocket (ND) to the number of teeth on the driven sprocket (NDR). The formula to calculate the gear ratio is as follows:
Gear Ratio (GR) = ND / NDR
Where:
- ND is the number of teeth on the driving sprocket.
- NDR is the number of teeth on the driven sprocket.
For example, if the driving sprocket has 20 teeth, and the driven sprocket has 40 teeth, the gear ratio would be:
GR = 20 / 40 = 0.5
In this example, the gear ratio is 0.5, which means the driven sprocket rotates at half the speed of the driving sprocket, but with twice the torque. This is a speed reduction gear ratio.
Conversely, if the driven sprocket had 20 teeth and the driving sprocket had 40 teeth, the gear ratio would be:
GR = 40 / 20 = 2
In this case, the gear ratio is 2, indicating a speed increase gear ratio. The driven sprocket would rotate twice as fast as the driving sprocket, but with half the torque.
Calculating the gear ratio is crucial for selecting the appropriate sprockets for a desired application. Gear ratios affect the output speed, torque, and overall performance of the mechanical system, so choosing the right gear ratio is essential for achieving the desired results.
editor by CX 2024-04-11
China OEM Specializing in Manufacturing Precision Sprocket Gear
Product Description
1. Produce strictly in accordance with standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA,Standard America or customer's drawing
4. Pilot bore, finished bore, taper bore and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes and other equipment.
10. Sprocket Models: Contains special sprocket according to customer's drawings, standard s
Haodan Transmission Parts Co., LTD., located in ZheJiang HangZhou HangZhou beautiful Baiyangdian Xiongan New Area, HangZhou is a famous sprocket town in China, a variety of mechanical parts production, 90% of the country's sprockets from HangZhou Xihu (West Lake) Dis.qiao Town exports and heavy countries, for a number of countries have made contributions to the production of machinery. Haotan Transmission Parts Co., Ltd. has more than 30 years of production experience, 2 generations of efforts by a small workshop slowly set up a limited company, in line with the quality of survival, to win the price of customers, to the business philosophy of faith and development to serve our customers, so that customers first, quality first.
procket (American standard and metric). /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Electric Cars, Motorcycle, Machinery, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Sintered Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Cast Iron |
| Samples: |
US$ 666/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer's Instructions: Adhere to the manufacturer's guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain's components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer's guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
What lubrication practices are recommended for sprocket gears?
Proper lubrication is crucial for the efficient and reliable operation of sprocket gears. The lubricant used should reduce friction, minimize wear, dissipate heat, and protect against corrosion. Here are some recommended lubrication practices for sprocket gears:
1. Lubricant Selection: Choose a high-quality lubricant specifically designed for sprocket gears. Look for lubricants with high film strength and anti-wear additives to protect the gear teeth from excessive wear and extend the sprocket's lifespan.
2. Lubrication Frequency: Regularly lubricate the sprocket gears as per the manufacturer's guidelines or equipment maintenance schedule. The frequency of lubrication depends on factors such as operating conditions, load, and environmental factors.
3. Cleanliness: Before applying new lubricant, ensure that the sprocket gears are clean and free from debris, dirt, and old lubricant. Clean the gears using a suitable solvent or cleaning agent to maximize the effectiveness of the new lubricant.
4. Proper Application: Apply the lubricant evenly and adequately to all the teeth of the sprocket gear. Ensure that the lubricant reaches the contact points between the teeth to form a protective film and reduce metal-to-metal contact.
5. Avoid Over-Lubrication: Applying excessive lubricant can lead to overheating and attract more dirt and debris, potentially causing damage to the gears. Follow the recommended lubrication quantities to avoid over-lubrication.
6. Re-Lubrication: In high-temperature or heavy-duty applications, the lubricant may degrade faster. Regularly monitor the sprocket gears for signs of insufficient lubrication, and re-lubricate as necessary.
7. Temperature Considerations: In environments with extreme temperatures, choose a lubricant with a suitable temperature range to ensure its effectiveness under those conditions.
8. Maintenance Records: Keep detailed records of the lubrication schedule, type of lubricant used, and any observations of unusual wear or performance issues. This information will help identify trends and potential problems early.
9. Inspections: Regularly inspect the sprocket gears for signs of wear, pitting, or abnormal damage. Early detection of issues allows for timely maintenance and prevents severe damage to the sprocket system.
10. Training: Ensure that personnel responsible for lubrication practices are adequately trained to apply the lubricant correctly and safely.
Following these lubrication practices will help maximize the efficiency, performance, and lifespan of sprocket gears in various mechanical systems.
editor by CX 2024-04-02
China supplier OEM Black Different Size Small PA6 Nylon Plastic Sprocket Gear
Product Description
OEM Black Different Size Micro Pa6 Plastic Tricycle Sprocket Gear Rings
Products Type
We can custom shape,size,color material and quantity for plastic gear as your requirment.
| Material | Nylon ,mc nylon, POM,ABS,PU,PP,PE,PTFE,UHMWPE,HDPE,LDPE, PVC,etc. |
| Color | Black, white, red, green, transparent or any color according to Pantone code |
| Size | As per customer's requirements |
| Technology | Injection molding, CNC machining, Extrusion,vacuum forming,Compression molding,Over molding&insert molding |
| Surface Treatment | Powder coating, Zinc coating, Galvanization, Electro-deposition coating, Chrome/zinc/nickel plating, Polishing, Silkscreen, Black oxide |
| Application | Automotive, ATV, Mechanical equipment, Construction, Home appliance, Aviation, Office facilities, Agriculture, etc. |
| Biggest Part Size | 1500*1500*1000mm |
| Tolerance | 0.01mm--0.001mm |
| Drawing Format | STEP/STP/IGS/STL/CAD/PDF/DWG and Other |
| Packaging | Can be customized packaging |
| Shippment | We have longterm cooperation with internation shipping agent and express company, so that shipping safty and arriving time are secured |
| Service | Product & Mold Design and Making,Material Modification,Surface Treatment,Assembly,Custom Packaging |
Company Profile
Zhongde (ZheJiang ) Machinery Equipment Co.,LTD is a company integrated in design,OEM&ODM plastic&rubber&CNCparts production.We can provide the best products and service at a competitive price.
Our Machine
We have different types of machines to meet different requriements. Most our machines were imported from overseal. The highest rotate speed of CNC machining center can reach to 20,000RPM. The largest vulcanize rubber machine can produce rubber parts within 3000mm.
Main Products
We can provide OEM service,which means producing base on your drawings or samples,also we can design according to its application or customer`s requirments.
Order Operation Flow
We execute each step according to the operation process flow, strictly, seriously and meet the requirements of customers with good quality on time.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | Order Sample For sample price, package information, and logisti
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can sprocket gears be used for vertical power transmission?
Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.
The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.
Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:
1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.
2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.
3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.
4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.
When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.
Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.
Can sprocket gears be used in underwater applications?
Yes, sprocket gears can be used in underwater applications with certain considerations. While sprocket gears are commonly used in various mechanical systems on land, their application underwater introduces additional challenges due to the aquatic environment's unique conditions. Here are some key factors to consider when using sprocket gears in underwater applications:
1. Corrosion Resistance: Exposure to water can lead to corrosion of the sprocket gear and other components. Therefore, it's crucial to use materials that offer excellent corrosion resistance. Stainless steel, brass, bronze, or other non-corrosive alloys are commonly used choices.
2. Waterproof Sealing: Ensure that the mechanical assembly is effectively sealed to prevent water ingress. Proper seals, gaskets, and O-rings should be used to keep water away from the critical components, reducing the risk of damage and maintaining the gear's performance.
3. Lubrication: Underwater applications require special consideration for lubrication. Standard lubricants may wash away or degrade underwater, leading to increased friction and wear. Specialized waterproof or marine-grade lubricants are necessary to maintain smooth operation and prevent corrosion.
4. Material Selection: Choose materials not only for corrosion resistance but also for their ability to withstand the hydrostatic pressure at the specific underwater depth where the sprocket gear will be used.
5. Environmental Factors: Consider other environmental factors, such as temperature variations, salinity, and presence of debris or marine life, which may affect the sprocket gear's performance and longevity.
6. Load and Speed: Understand the specific load and speed requirements of the underwater application to ensure the sprocket gear can handle the conditions effectively.
7. Regular Inspection: Implement a proactive maintenance program with regular inspections to identify any signs of wear, corrosion, or damage. Promptly address any issues to prevent equipment failure.
By carefully considering these factors and selecting appropriate materials and designs, sprocket gears can be successfully used in underwater applications. Whether in marine equipment, underwater robotics, or other submersible systems, proper engineering and maintenance are essential for reliable and efficient operation.
Can sprocket gears be used in high-temperature environments?
Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.
High-temperature environments can pose several challenges to sprocket gears, including:
- Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
- Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
- Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.
To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.
Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.
Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.
In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.
editor by CX 2024-03-25
China supplier Professional OEM Mc PA66 Plastic Spur Gear PTFE Plastic Sprocket
Product Description
Product Description
| Name | CNC machine plastic parts |
| Material | Nylon,PEEK,PI,PEI,PU,PA6,POM,PE,UPE,PTFE,ABS,PC,PP,PS,PMMA,PBT,PVC,PA66,PA66+30%GF,TPE. Etc. |
| Color | White, black, green, nature, blue, yellow, etc. |
| Condition | In stock/ Made to order |
| Style | Injection molding , Compression molding |
| Shape | As per your drawing |
| Physical Properties | Physical Properties of Common Engineering Plastics |
| Other Shape | Sheet, rod, tube, gear, rack, pulley, guide rail, plastics fittings, and so on |
| Packing | Plastic bags, Cartons, Wooden case, Pallet, Container, etc. |
| Other | Shipping status notification during delivery. Regular notification of new styles & hot selling styles. |
| Feature: | Good abrasion resistance |
| Application | Industry, medical and pharmaceutical, semiconductor, photovoltaic energy, chemical electronics, communications Etc. |
| Sample | General free sample ,Normally is USD 30~110 per Style If Special Design We Need Sample Charge, and we will Refund when You Have Official Bulk Order. |
| Sample time | General 3-7 days after got your drawing and payment |
| Delivery | By Air or Sea. If Choose by Air, it is Faster Like You Purchase from the Local Market. |
Detailed Photos
Professional OEM MC PA66 plastic spur gear PTFE plastic sprocket
Company Profile
HangZhou CZPT rubber & Plastic Products Co. , Ltd. was founded in 2015, formerly known as HangZhou Xihu (West Lake) Dis. Rubber Factory was founded in 1976, is a scientific research, production and sales of modern enterprises. The company is located in the outskirts of HangZhou, the ancient capital of the 6 dynasties, the emperor Ganlong praised as "Xihu (West Lake) Dis. Holy Land" of Xihu (West Lake) Dis. District, is the national professional industrial rubber plate production base.
The company's main products are industrial rubber sheet, Special Industrial Rubber Sheet, non-slip Rubber Sheet, CZPT Rubber Mat, insulating rubber sheet, waterproof rubber sheet, rubber lining, door and window sealing strip, CZPT foam sponge strip, rubber mould products and moulds, PTFE and Nylon Plate, PTFE and Nylon Rod, PTFE and nylon accessories.
With strong Technical Force, a high-level professional research team, and with the relevant universities, scientific research institutes to maintain long-term cooperation and exchange, continue to develop new products to meet the needs of different users. And strictly in accordance with national standards and user requirements, combining enterprise ISO9 tons 1 year .
2.Is your company governmental or private?
It is a private company.
3. How many employees in your company?How many for production,and how many office people?
There are about 1000 employees. 900 for production, and 100 for office people.
4. How many tons can you produce each day?How many containers do you export every month?
We can produce 100 tons each day,and for exporting 500 containers around.
5. What's your annual sales volume?
Around 35 millions US dollar.
6. How do you control your quality?
We inspect 3 steps:raw material inspection,during production inspection and before warehousing inspection.
7. How often do you inspect your products?
For physical testing,we test every batch,it's about every 1 hundred meters.
For the surface and size,we check every roll after production and before warehousing.
8. Can you print our logo on the rubber sheet or package bags?
Yes,we can print the logo as customer's design.
9. What's your product guarantee period?
Under the condition in the warehouse,we can guarantee 2 years no cracks even on our lowest grade product.On used products,it should depend on the using condition.
10. What certificate have you passed?
Our factory has passed ISO9001.Our product has passed reach standard testing,and SGS certificate.
11. What about the payment ?
TT LC cash
12. Is OEM available ?
We can produce as customer ideas.
13. How to deal with the faulty products once we got ?
First ,find the reason ,it is the products problem or damaged by the transportation ,no matter what the reason is ,we will change a new part .
14.How to check the quality before shipment ?
You can come to check by yourself, your friend or the third checking institution. Also can by video.
15. Is sample available ?
We can arrange free sample , but the international courier charge is by your side .
Products application
Professional OEM MC PA66 plastic spur gear PTFE plastic sprocket
Factory environment
some other products
Professional OEM MC PA66 plastic spur gear PTFE plastic sprocket
Professional OEM MC PA66 plastic spur gear PTFE plastic sprocket
Company other products :
1. Industrial Rubber sheet : SBR, NBR,CR, EPDM,Silicone,Viton, Nature,Fireproof ,waterproof , ESD, insulation rubber sheet
2. Gym rubber floor : granular rubber tile , dog bone rubber tile , CZPT rubber rolls
3. OEM Rubber parts
4. door and window sealing strip
5. CNC plastic products
product-group/xohfkSQYvLWP/Plastic-productions-catalog-1.html
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Plastic Type: | Thermosetting Plastic |
|---|---|
| Plastic Form: | Granule |
| Molding Method: | Compression Molding |
| Color: | White, Blue, Red, Green, Brown, Yellow, Nature |
| Material: | Nylon, PA, POM, PE, Upe, PTFE, PVC, ABS |
| Physical Properties: | Physical Properties of Common Engineering Plastics |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the differences between chain sprockets and sprocket gears?
Chain Sprockets and Sprocket Gears are both integral components of mechanical power transmission systems, but they have some key differences in terms of their design, application, and mode of operation.
Chain Sprockets:
Chain sprockets are toothed wheels with evenly spaced teeth or cogs that mesh with the links of a roller chain. They are primarily used in chain and sprocket systems to transfer rotational motion and torque between two parallel shafts. The teeth of chain sprockets are designed to fit precisely with the chain, ensuring smooth and efficient power transmission.
Key features of chain sprockets:
- Designed for use with roller chains.
- Transfer motion between parallel shafts.
- Teeth mesh with the links of the chain.
- Used in various applications, including bicycles, motorcycles, conveyors, and industrial machinery.
Sprocket Gears:
Sprocket gears, on the other hand, are toothed wheels with teeth that mesh with the links of a toothed belt or chain. They are part of belt drive systems and chain drive systems, transferring motion and power between non-parallel shafts. Sprocket gears are commonly used in applications where a longer distance separates the driving and driven shafts.
Key features of sprocket gears:
- Designed for use with toothed belts or chains.
- Transfer motion between non-parallel shafts.
- Teeth mesh with the links of the belt or chain.
- Used in applications like internal combustion engines, washing machines, and industrial machinery.
Main Differences:
- Design: Chain sprockets have teeth that mesh with the links of a roller chain, while sprocket gears have teeth that mesh with the links of a toothed belt or chain.
- Application: Chain sprockets are used in chain drive systems for parallel shafts, while sprocket gears are used in belt drive and chain drive systems for non-parallel shafts.
- Shaft Orientation: Chain sprockets work with parallel shafts, while sprocket gears accommodate non-parallel shafts.
- Power Transmission: Both are used for power transmission but in different configurations and applications.
Ultimately, the choice between chain sprockets and sprocket gears depends on the specific mechanical system's requirements, shaft orientation, and the type of power transmission needed.
How do I extend the lifespan of sprocket gears?
Extending the lifespan of sprocket gears is crucial to ensure the long-term efficiency and reliability of mechanical systems where they are employed. Proper maintenance and care can significantly contribute to prolonging the lifespan of sprocket gears:
1. Lubrication: Regular and proper lubrication is essential to reduce friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer's recommendations for lubrication intervals.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive wear on both the sprocket and the chain. Too much tension can cause premature wear, while too little tension can result in chain slippage and increased wear on the sprocket teeth.
3. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear's lifespan.
4. Cleaning: Keep the sprocket gears clean and free from debris and contaminants that can accelerate wear. Regularly clean the sprocket and chain using appropriate cleaning agents and methods.
5. Proper Alignment: Ensure proper alignment between the sprocket gear and the chain to distribute the load evenly across the teeth. Misalignment can cause uneven wear and premature failure.
6. Material Selection: Choose high-quality sprocket gears made from durable and wear-resistant materials that are suitable for the application's specific operating conditions.
7. Avoid Overloading: Operating sprocket gears within their recommended load-carrying capacity helps prevent premature wear and failure.
8. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material's properties and lead to accelerated wear.
9. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
10. Proper Storage: Store spare sprocket gears in a clean, dry, and controlled environment to prevent corrosion or damage before installation.
By following these practices and paying attention to the sprocket gear's condition, you can extend its lifespan and optimize the performance of mechanical systems that rely on them.
Can sprocket gears be used in high-temperature environments?
Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.
High-temperature environments can pose several challenges to sprocket gears, including:
- Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
- Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
- Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.
To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.
Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.
Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.
In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.
editor by CX 2024-03-25
China Best Sales OEM Chain Sprocket Carbon Steel Gear
Product Description
We can make all kinds of gears according to clients drawing and specifications ,specializing in non-standard items
>>Main Product
Spur Gear
Planetary Gear
Metal Gears Small
Gear Wheel
Ring Gear
Gear Shaft
Helical Gear
Pinion Gear
Spline Shaft .
Specifications:
1. Suitable for many kinds of transmission system.
2. Material and precision can be as requirements:
metal, plastic, brass etc.
3. Processing:
forged,casting,heattreatment,or quenching and tempering carburization.
4. We have complete gear machining equipments: gear hobbing machine, shaving machine, gear
shaper, gear grinding machine and heat treatment center,all of the production procedure are strictly
controlled by ourselves, we can sure the final products to meet your requirements.
5. Each processing, strictly quality control:
ISO9001:2008.
6. Can manufacture all kinds of gears.
A Professional on Drawing analysis, Meeting discussing, program auditing, PC & QC.
| Machining Equipments | CNC center, CNC milling machine, CNC turning machine, CNC lathes,5 axis machine etc. |
| Materials | 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420 2. Steel:C45(K1045), C46(K1046),C20 3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200 (CuZn37), C28000(CuZn40) 4. Bronze: C51000, C52100, C54400, etc 5. Iron: 1213, 12L14,1215 6. Aluminum: Al6061, Al6063 7.OEM according to your request |
| Processing | Designing drawing, Opening mould/tooling, Precision machining (forging, Machining, Hobbing, Milling, Shaping, Shaving, Grinding, Heat treatment.) Inspection, Packing and shipping |
| QC : | Technicians self-check in production, final-check before package by professional Quality inspector |
| Heat Treatment Method | Carburizing, Induction, Flame, Nitriding, etc. |
| Main Machines | NC gear hobbing machines, NC Gear Shapers (Gealson, Moude), NC lathe, NC gear Shaving machines, NC gear millling, Nc gear grinding Machines. |
| Surface Finish | Anodize, Plating, Brushing, Polishing, Blackened, Powder coating, Sandblasting, Laser engraving etc. |
| Inspection Equipment | CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Pass meter, Pass meter etc. |
| Advantage | Quality first Service superior , Advanced equipment,Experienced workers, Perfect testing equipment |
| Application | Medical parts; Machine parts; Aerospace machinery parts; Ships equipment parts; Electrical parts; Furniture parts; Kitchen tools; Telecommunications, etc. |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Bevel Wheel |
| Material: | Stainless Steel |
| Customization: |
Available
| Customized Request |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer's Instructions: Adhere to the manufacturer's guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I extend the lifespan of sprocket gears?
Extending the lifespan of sprocket gears is crucial to ensure the long-term efficiency and reliability of mechanical systems where they are employed. Proper maintenance and care can significantly contribute to prolonging the lifespan of sprocket gears:
1. Lubrication: Regular and proper lubrication is essential to reduce friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer's recommendations for lubrication intervals.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive wear on both the sprocket and the chain. Too much tension can cause premature wear, while too little tension can result in chain slippage and increased wear on the sprocket teeth.
3. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear's lifespan.
4. Cleaning: Keep the sprocket gears clean and free from debris and contaminants that can accelerate wear. Regularly clean the sprocket and chain using appropriate cleaning agents and methods.
5. Proper Alignment: Ensure proper alignment between the sprocket gear and the chain to distribute the load evenly across the teeth. Misalignment can cause uneven wear and premature failure.
6. Material Selection: Choose high-quality sprocket gears made from durable and wear-resistant materials that are suitable for the application's specific operating conditions.
7. Avoid Overloading: Operating sprocket gears within their recommended load-carrying capacity helps prevent premature wear and failure.
8. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material's properties and lead to accelerated wear.
9. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
10. Proper Storage: Store spare sprocket gears in a clean, dry, and controlled environment to prevent corrosion or damage before installation.
By following these practices and paying attention to the sprocket gear's condition, you can extend its lifespan and optimize the performance of mechanical systems that rely on them.
Can sprocket gears be used in high-temperature environments?
Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.
High-temperature environments can pose several challenges to sprocket gears, including:
- Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
- Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
- Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.
To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.
Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.
Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.
In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.
editor by CX 2024-03-19