Product Description
Product Description
Product introduction
| Gear processing modules | 0.5-20 |
| Max. machining diamete for gear milling | 1720mm |
| Max. main shaft through-hole diameter for gear grinding | 180mm |
| Max, main shaft through-hole diameter for gear milling | 320mm |
| Max. machining diameter for gear grinding | 850mm |
| Highest precision | GB11365-89 4 grade |
| Transmission ratio | 1:1-1:10 |
My advantages:
1. High quality materials, professional production, high-precision equipment. Customized design and processing;
2. Strong and durable, strong strength, large torque and good comprehensive mechanical properties;
3. High rotation efficiency, stable and smooth transmission, long service life, noise reduction and shock absorption;
4. Focus on gear processing for 20 years.
5. Carburizing and quenching of tooth surface, strong wear resistance, reliable operation and high bearing capacity;
6. The tooth surface can be ground, and the precision is higher after grinding.
The company is a manufacturer of high-quality leather wheel transmission components and mechanical transmission equipment. Its products are widely used in various fields such as aviation, aerospace, shipbuilding, rail transit, engineering vehicles, and industrial automation equipment. The company was founded in December 2002, and its factory is located in Xihu (West Lake) Dis.ng Industrial Zone, Jiangfu City, ZheJiang Province. The existing factory building covers an area of 38000 square meters, with a registered capital of 20 million yuan and a total asset of about 180 million yuan. It has passed the CCs ship inspection and recognition by China's classification society, and has been rated as a high-tech enterprise in ZheJiang Province and the ZheJiang High Precision Gear Transmission Key Component Engineering Technology Research Center.
The company has the most advanced manufacturing and testing equipment for bright precision gear transmission components in the world, with manufacturing accuracy CZPT national standard 3-4 levels. It has 275G and 800G CNC Yawei gear grinding machines from Grissom Phoenix, Germany, Capa vX55 and VX59 CNC gear grinding centers from Germany, ZE400 and ZE8OO shaped gear grinding machines from Capa Niles, worm gear grinding machines from Germany, Graub 5-extraction linkage machining center from Germany, KS42 high-precision straight bevel gear grinding machine from Switzerland, Teng gear grinding machine from Switzerland, S33 high-precision CNC universal domestic and foreign grinding machine from Stuttgart, Switzerland, and GMM1500 gear measuring center from Grissom GMM1500, Zeiss Santang, Germany.
After years of testing, exploration, and improvement, the company's research and development team has mastered key technologies such as high-precision gear CNC grinding technology, inspection technology, heat treatment technology for thin-walled parts, independent design and manufacturing technology for special cutters, fixtures, and special measuring tools. At present, the company's manufacturing capacity and technical development level rank among the leading levels of domestic peers.
FAQ
| Main Markets? | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
| How to order? | * You send us drawing or sample |
| * We carry through project assessment | |
| * We give you our design for your confirmation | |
| * We make the sample and send it to you after you confirmed our design | |
| * You confirm the sample then place an order and pay us 30% deposit | |
| * We start producing | |
| * When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
| * Trade is done, thank you!! |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: |
US$ 60/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do I properly install and align sprocket gears?
Proper installation and alignment of sprocket gears are crucial to ensure smooth and efficient power transmission and to prevent premature wear. Here are the steps to properly install and align sprocket gears:
1. Gather the Required Tools:
Before starting the installation process, gather all the necessary tools, including a torque wrench, measuring tools (calipers or micrometers), leveling tools, and alignment tools.
2. Clean the Components:
Thoroughly clean the sprocket gears and the shafts on which they will be mounted. Remove any dirt, debris, or old lubricant to ensure proper contact between the components.
3. Check for Damage:
Inspect the sprocket gears for any signs of damage, wear, or deformation. If any issues are found, replace the damaged components before proceeding.
4. Ensure Proper Fit:
Ensure that the bore diameter of the sprocket gear matches the diameter of the shaft on which it will be mounted. The fit should be neither too loose nor too tight, and the keyway (if present) should align properly with the key on the shaft.
5. Align Sprocket Gears:
For chain and sprocket systems, align the sprocket gears precisely with each other. The teeth of the driving and driven sprockets should mesh smoothly with the chain. For belt drive systems, ensure the sprocket gears align with each other and the belt tracks properly within the sprockets.
6. Check Axial Alignment:
Ensure that the sprocket gears are axially aligned with each other and perpendicular to their respective shafts. Any misalignment can cause premature wear and noise during operation.
7. Set Tension:
If using a chain and sprocket system, adjust the tension of the chain to the manufacturer's specifications. Proper tension ensures optimal power transmission and extends the life of both the chain and sprocket gears.
8. Lubricate:
Apply the appropriate lubricant to the sprocket gear teeth and the chain or belt as required. Lubrication reduces friction, heat, and wear during operation.
9. Torque Fasteners:
If the sprocket gears are held in place with fasteners (such as set screws or bolts), torque them to the recommended specifications. This ensures that the sprocket gears are securely attached to the shafts and will not slip during operation.
10. Perform a Trial Run:
After installation, run the system at low speed and observe its performance. Check for any unusual noise, vibration, or misalignment. If any issues are detected, stop the system immediately and address the problem.
Following these steps will help ensure that the sprocket gears are properly installed and aligned, leading to reliable and efficient power transmission in your mechanical system.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain's components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer's guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
What are the different types of sprocket gears and their applications?
Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:
- 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
- 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
- 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
- 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
- 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
- 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
- 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.
The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.
editor by CX 2024-03-26