China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer

Product Description

Standard carbon steel spur gear from from China manufacturer SCS

With more than 20 years' experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.

Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Forging Parts
Material: 45# Steel
Teeth: 9t-120t
Samples:
US$ 9.99/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

How do you maintain and inspect sprocket gears for wear and damage?

Maintaining and inspecting sprocket gears is essential to ensure their optimal performance and prevent costly breakdowns. Here are the steps for proper maintenance and inspection of sprocket gears:

1. Lubrication: Regularly lubricate the sprocket gears to reduce friction and wear between the teeth. Use the appropriate lubricant recommended by the manufacturer and follow the lubrication schedule to ensure smooth operation.

2. Cleaning: Keep the sprocket gears clean from debris, dirt, and contaminants that can accelerate wear. Use a brush or compressed air to remove any buildup on the gears.

3. Alignment: Check the alignment of the sprocket gears regularly. Misalignment can cause uneven wear on the teeth and reduce the lifespan of the gears. Make necessary adjustments to ensure proper alignment.

4. Tension: If the sprocket gear is used with a chain, maintain the correct tension of the chain. Too much tension can lead to excessive wear, while too little tension can cause the chain to skip or come off the sprocket.

5. Inspect Teeth: Examine the teeth of the sprocket gear for signs of wear, pitting, or chipping. Worn-out teeth can lead to poor engagement with the chain or other mating gears.

6. Check Teeth Profile: Ensure that the teeth profile is intact and free from any damage. A damaged tooth profile can result in noisy operation and reduced efficiency.

7. Measure Teeth Thickness: Measure the thickness of the teeth regularly to detect any abnormal wear. If the teeth become too thin, the sprocket gear should be replaced.

8. Replace Worn-out Gears: If you notice significant wear or damage during the inspection, replace the sprocket gear immediately. Continuing to use worn-out gears can lead to more extensive damage and potential failure.

9. Monitor Operating Conditions: Keep track of the operating conditions of the machinery. Extreme conditions such as high loads, excessive speeds, or harsh environments can accelerate wear on sprocket gears.

10. Regular Maintenance Schedule: Create a maintenance schedule for inspecting and servicing the sprocket gears. The frequency of inspections may vary based on the operating conditions, but it is generally recommended to inspect them at least once every three months.

By following these maintenance and inspection practices, you can prolong the life of sprocket gears, minimize downtime, and ensure the safe and efficient operation of the machinery they are a part of.

sprocket gear

What are the best practices for cleaning and maintaining sprocket gears?

Proper cleaning and maintenance are essential for ensuring the longevity and efficient performance of sprocket gears. Here are the best practices for cleaning and maintaining sprocket gears:

1. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear's lifespan.

2. Cleaning: Clean the sprocket gears regularly to remove dirt, debris, and contaminants that can accelerate wear. Use a soft brush or cloth to clean the sprocket teeth and the surrounding areas.

3. Avoid Harsh Chemicals: When cleaning sprocket gears, avoid using harsh chemicals or solvents that can damage the surface finish or compromise the material's integrity. Stick to recommended cleaning agents by the manufacturer.

4. Lubrication: Proper lubrication is crucial to reducing friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer's recommendations for lubrication intervals.

5. Correct Tension: Maintain the correct chain tension to prevent excessive wear on both the sprocket and the chain. Ensure the chain is not too loose or too tight, as both conditions can cause premature wear.

6. Alignment: Check and maintain proper alignment between the sprocket gear and the chain. Misalignment can cause uneven wear and premature failure.

7. Material Selection: Choose sprocket gears made from high-quality and durable materials that are suitable for the specific operating conditions of the application.

8. Overload Prevention: Operate sprocket gears within their recommended load-carrying capacity to prevent premature wear and failure.

9. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material's properties and lead to accelerated wear.

10. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.

By following these best practices for cleaning and maintaining sprocket gears, you can maximize their lifespan, reduce downtime, and optimize the performance of mechanical systems that utilize them.

sprocket gear

Can sprocket gears be used in high-temperature environments?

Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.

High-temperature environments can pose several challenges to sprocket gears, including:

  • Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
  • Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
  • Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.

To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.

Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.

Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.

In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.

China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer  China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer
editor by Dream 2024-05-08

China wholesaler Sprocket Wheel Synchronous Processing Nylon Gear M5

Product Description

 

 

Product Description

Products

Gear

Module

M0.3-M10

Precision grade

DIN5, DIN6, DIN7, DIN8, DIN10

Pressure angle:

14.5 degree, 15 degree, 20 degree

Material

C45 steel, ,304SS, 316SS, 20CrMo,40Cr, brass, nylon, POM, and so on

Heat treatment

Hardening and Tempering

High Frequency Quenching

Carburization etc

Surface treatment

Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating

Application

Precision cutting machines.Lathes machine
Milling machines
Grinders machine
Automated mechanical systems
Automated warehousing systems.

Machining process:

CNC engine latheCNC milling machine
CNC drilling machine
CNC grinding machine
CNC cutting machines
Machining center

Detailed Photos

Test

Inspection steps before delivery: Use GO/Nogo inspect hole---Use micrometer check dimensions---Next use stiffness detection system inspect hardness--Finally use CMM inspect precision

Packaging & Shipping

 

Company Profile

ZheJiang Haorongshengye Electrical Equipment Co., Ltd.

1. Was founded in 2008
2. Our Principle:

"Credibility Supremacy, and Customer First"
3. Our Promise:

"High quality products, and Excellent Service"
4. Our Value:

"Being Honesty, Doing the Best, and Long-lasting Development"
5. Our Aim:

"Develop to be a leader in the power transmission parts industry in the world"
 

6.Our services:

1).Competitive price

2).High quality products

3).OEM service or can customized according to your drawings

4).Reply your inquiry in 24 hours

5).Professional technical team 24 hours online service

6).Provide sample service

Main products

Machines

 

Exbihition

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Hobbing
Toothed Portion Shape: Spur Gear
Material: Steel
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

What safety precautions should be taken when working with sprocket gear assemblies?

Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:

1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.

2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.

3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.

4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.

5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.

6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.

7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.

8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.

9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.

10. Follow Manufacturer's Instructions: Adhere to the manufacturer's guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.

11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.

12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.

By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.

sprocket gear

Can sprocket gears be used in underwater applications?

Yes, sprocket gears can be used in underwater applications with certain considerations. While sprocket gears are commonly used in various mechanical systems on land, their application underwater introduces additional challenges due to the aquatic environment's unique conditions. Here are some key factors to consider when using sprocket gears in underwater applications:

1. Corrosion Resistance: Exposure to water can lead to corrosion of the sprocket gear and other components. Therefore, it's crucial to use materials that offer excellent corrosion resistance. Stainless steel, brass, bronze, or other non-corrosive alloys are commonly used choices.

2. Waterproof Sealing: Ensure that the mechanical assembly is effectively sealed to prevent water ingress. Proper seals, gaskets, and O-rings should be used to keep water away from the critical components, reducing the risk of damage and maintaining the gear's performance.

3. Lubrication: Underwater applications require special consideration for lubrication. Standard lubricants may wash away or degrade underwater, leading to increased friction and wear. Specialized waterproof or marine-grade lubricants are necessary to maintain smooth operation and prevent corrosion.

4. Material Selection: Choose materials not only for corrosion resistance but also for their ability to withstand the hydrostatic pressure at the specific underwater depth where the sprocket gear will be used.

5. Environmental Factors: Consider other environmental factors, such as temperature variations, salinity, and presence of debris or marine life, which may affect the sprocket gear's performance and longevity.

6. Load and Speed: Understand the specific load and speed requirements of the underwater application to ensure the sprocket gear can handle the conditions effectively.

7. Regular Inspection: Implement a proactive maintenance program with regular inspections to identify any signs of wear, corrosion, or damage. Promptly address any issues to prevent equipment failure.

By carefully considering these factors and selecting appropriate materials and designs, sprocket gears can be successfully used in underwater applications. Whether in marine equipment, underwater robotics, or other submersible systems, proper engineering and maintenance are essential for reliable and efficient operation.

sprocket gear

What is a sprocket gear, and how does it function in a mechanical system?

A sprocket gear is a toothed wheel with evenly spaced teeth that mesh with a chain, track, or another perforated material. It is an essential component in mechanical systems where rotary motion needs to be transmitted from one shaft to another. Sprocket gears are commonly used in various applications, including bicycles, motorcycles, conveyor systems, and industrial machinery.

Here's how a sprocket gear functions in a mechanical system:

  1. Power Transmission: The primary function of a sprocket gear is to transfer rotational motion and power from one shaft to another. When a rotational force (torque) is applied to the input shaft, the teeth of the sprocket engage with the links of the chain. As the input shaft rotates, the chain moves along with it, causing the output shaft connected to the other sprocket to rotate as well.
  2. Gear Ratio: The number of teeth on the sprocket gears determines the gear ratio, which defines the speed and torque relationship between the input and output shafts. A larger sprocket with more teeth results in higher torque and lower speed, while a smaller sprocket with fewer teeth provides higher speed and lower torque.
  3. Speed and Torque Conversion: Sprocket gears enable the conversion of speed and torque between shafts. By selecting different sprocket sizes, mechanical systems can achieve the desired balance of speed and torque for their specific applications. This is especially useful in scenarios where the input and output shafts need to rotate at different speeds or generate different levels of force.
  4. Directional Change: In some applications, sprocket gears can also change the direction of rotation. By using multiple sprockets and a chain, mechanical systems can transfer power around corners or between non-parallel shafts.
  5. Chain Engagement: The teeth on the sprocket gear are designed to mesh precisely with the links of the chain, ensuring a positive engagement. This allows for a reliable transfer of motion and power, preventing slippage and ensuring efficient operation.
  6. Noise and Vibration Damping: Sprocket gears with well-machined teeth and proper lubrication can reduce noise and vibration in mechanical systems, leading to smoother and quieter operation.

Overall, sprocket gears play a critical role in power transmission systems, providing a simple and effective means of transferring motion and energy between rotating shafts. Their versatility and efficiency make them indispensable components in various mechanical applications.

China wholesaler Sprocket Wheel Synchronous Processing Nylon Gear M5  China wholesaler Sprocket Wheel Synchronous Processing Nylon Gear M5
editor by Dream 2024-05-08

China best Precision Machinery Steel Metal Rig Gear for for Drilling Machine/ Reducer/ Pile-Driver Tower/Sprocket/Pulley

Product Description

 

Product Description

 

Material : 42CrMo, 20CrMnMo, 20Cr2Ni4, 35CrMo, 20CrMnTi and Other high intensity alloy steel
Tooth Flank : Tooth flank carburization and nitrification, with rigidity of HRC58-62
Gear precision : Grade V
Precise measurement : Precise measurement and surface finishes are available
Material : High dense alloy or other materials is also available
Customization : Customer drawing and samples are welcome

LOGO: BaoXin
Package: Special Woody Carton
Output: 270PCS per month
HS Code: 84839000
Note: For special order, please write and provide drawing sample
 

Detailed Photos

 

 

Company Profile

 

 

For 12 years, Mr. Zhou has stood for innovative products, a passion for technology, responsibility.

As a globally technology manufacture company, we put all of energy to promise quality and excellence. We've organized resources into new and established markets and developed gears, sheaves and so on.
Our results announcement is over USD 10, 000, 000 per fiscal year. Last but not least, we've doing hard work to perfect ourselves, tapping business opportunities.

 

Certifications

 

 

Packaging & Shipping

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cut Gear
Toothed Portion Shape: Bevel Wheel
Material: 42CrMo
Customization:
Available

|

Customized Request

sprocket gear

Can sprocket gears be used for heavy-duty applications in industrial machinery?

Yes, sprocket gears are commonly used in heavy-duty applications in various industrial machinery. Their robust design, high load-carrying capacity, and reliable power transmission make them well-suited for demanding industrial environments. Some of the key reasons sprocket gears are preferred for heavy-duty applications include:

1. Strength and Durability: Sprocket gears are typically made from strong and durable materials, such as hardened steel or cast iron. This allows them to withstand heavy loads and high torques without deformation or failure.

2. High Load Capacity: The tooth profile of sprocket gears, especially those with involute teeth, distributes the load evenly across the gear teeth, enabling them to handle substantial forces and transmit power efficiently.

3. Versatility: Sprocket gears can be designed in various configurations, such as single, double, or triple-strand setups, to accommodate different load requirements. They can also be used in combination with multiple sprockets and chains to create complex power transmission systems.

4. Effective Power Transmission: Sprocket gears provide reliable power transmission with minimal slippage or backlash. This is crucial in heavy-duty machinery, where precision and consistency are essential for optimal performance.

5. Easy Maintenance: Sprocket gears are relatively easy to maintain, as they can be individually replaced if worn or damaged. This reduces downtime and maintenance costs in industrial settings.

6. Adaptability: Sprocket gears can be used with various types of chains, such as roller chains, silent chains, or specialty chains, allowing for adaptation to different industrial applications.

7. Cost-Effective Solution: Considering their durability and long lifespan, sprocket gears offer a cost-effective solution for heavy-duty applications in industrial machinery.

Common examples of heavy-duty industrial machinery that use sprocket gears include conveyor systems, agricultural equipment, mining machinery, construction machinery, and manufacturing equipment.

It is important to select the appropriate sprocket gear size, material, and tooth configuration based on the specific requirements of the machinery and the operating conditions to ensure reliable and efficient performance in heavy-duty industrial applications.

sprocket gear

How do I calculate the pitch circle diameter for a sprocket gear system?

Calculating the pitch circle diameter is essential when designing or working with a sprocket gear system. The pitch circle diameter (PCD) represents the circle on which the centers of the sprocket teeth lie. To calculate the pitch circle diameter, you'll need to know the number of teeth on the sprocket and the pitch diameter.

Step 1: Determine the Number of Teeth (N): Count the total number of teeth on the sprocket. This value is denoted as 'N'.

Step 2: Find the Pitch Diameter (PD): The pitch diameter is the diameter of the pitch circle on which the teeth are located. If you already have the pitch diameter provided, proceed to the next step. Otherwise, you can calculate the pitch diameter using the formula:

PD = N / (DP * π)

Where:

PD = Pitch Diameter

N = Number of Teeth

DP = Diametral Pitch (teeth per inch)

π (Pi) = 3.14159 (approximately)

Step 3: Calculate the Pitch Circle Diameter (PCD): The pitch circle diameter can be calculated using the following formula:

PCD = PD * cos(180° / N)

Where:

PCD = Pitch Circle Diameter

PD = Pitch Diameter (calculated in Step 2)

N = Number of Teeth

The resulting value of the pitch circle diameter will help you in various aspects of sprocket gear system design and analysis, such as determining the center distance between two sprockets or matching the sprocket with a compatible chain.

Remember that accurate measurements and precise calculations are crucial for successful sprocket gear system performance. If you are unsure about the calculations or dealing with complex sprocket configurations, consulting with a qualified engineer or using specialized software can be beneficial.

sprocket gear

What are the advantages of using a sprocket gear over other types of gears?

Sprocket gears offer several advantages over other types of gears, making them a popular choice in various mechanical systems and power transmission applications. Here are the key advantages:

  1. Efficient Power Transmission: Sprocket gears, when used with chains or belts, provide an efficient means of power transmission over long distances. The engagement of teeth in a sprocket gear and the chain or belt ensures a positive drive, minimizing power losses and maximizing efficiency.
  2. High Gear Ratios: Sprocket gears can achieve high gear ratios in a compact design, allowing for significant speed reduction or amplification. This makes them suitable for applications that require precise speed control and torque conversion.
  3. Simple and Cost-Effective: Sprocket gears are relatively simple in design, making them cost-effective to manufacture and maintain. They consist of a circular disc with teeth around the circumference, which can be readily machined or cast.
  4. Easy Installation and Replacement: Sprocket gears are easy to install and replace, especially in chain-driven systems. Changing a sprocket gear requires minimal downtime, making maintenance and repairs more convenient.
  5. Flexible Design Options: Sprocket gears come in various sizes, tooth profiles, and materials, providing flexibility in design to suit different applications. They can be custom-made to match specific requirements.
  6. High Load Capacity: Sprocket gears, particularly those made from durable materials, can handle high loads and transmit significant power without experiencing premature wear or failure.
  7. Quiet and Smooth Operation: When paired with well-lubricated chains or belts, sprocket gear systems can operate quietly and smoothly, reducing noise and vibration levels in the mechanical system.
  8. Wide Range of Applications: Sprocket gears find applications in various industries, including automotive, machinery, robotics, agricultural equipment, and more. They are suitable for both heavy-duty and light-duty systems.
  9. Excellent for High-Speed Applications: In high-speed applications, sprocket gears offer reliable performance with minimal heat generation due to their positive engagement with chains or belts.

While sprocket gears offer numerous advantages, their selection should consider specific application requirements, load conditions, operating environment, and other factors to ensure optimal performance and longevity.

China best Precision Machinery Steel Metal Rig Gear for for Drilling Machine/ Reducer/ Pile-Driver Tower/Sprocket/Pulley  China best Precision Machinery Steel Metal Rig Gear for for Drilling Machine/ Reducer/ Pile-Driver Tower/Sprocket/Pulley
editor by Dream 2024-05-07

China OEM Customized Gear Rack Bevel Gear Sprocket Chain Coupling Worm Synchronous Gear Brass Worm Wheels Gear for Transmission Parts

Product Description

Item:Customized gear rack bevel gear sprocket chain coupling worm synchronous gear Brass Worm Wheels Gear  for Transmission Parts

1. High degree of automation and high production efficiency;

2. Strong adaptability to CNC machining objects. When changing the processing object, in addition to replacing and solving the blank clamping mode, it only needs to be reprogrammed;

3. High machining precision and stable quality. The machining dimensional accuracy is between 0.005 ~ 0.01 mm, which is not affected by the complexity of parts;

Parameter :
 

Item Customized gear rack bevel gear sprocket chain coupling worm synchronous gear Brass Worm Wheels Gear  for Transmission Parts
Weight Customized
Dimension Customized
Material Aluminum alloy(6063 T5,6061,5052,7075,1060...),Stainless steel(316L,304,303...),Copper,Brass,Bronze,Carbon steel,PET,POM,Nylon...
Machined Technology 3,4,5 Axis CNC Machining,CNC Milling,CNC Turning,Laser Cutting,Die Casting,Cold forging,Aluminum Extrusion,Sheet Metal Fabrication,Stamping,Welding,Friction Stir Welding,Assembling.
Surface Treatment Anodizing,Painting,Powder Coating,electrophoresis,Passivation,Sand Blasting,Plating,Blackening,Polishing...
Tolerance ±0.01MM
Application Electronic products body ,Telecom Chasis,Cover,aerospace structure parts,heat sink,aluminum cooling plate,gear&shaft,bearing,high speed feed through,other OEM/ODM customized machining parts

Our advantage:

1. Experienced engineering team;

2. Full process QC inspection, complete quality system before, during and after processing;

3. Efficient and rapid response, benign interaction between business and production, and accurately grasp customer requirements;

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

Can sprocket gears be used for vertical power transmission?

Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.

The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.

Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:

1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.

2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.

3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.

4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.

When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.

Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.

sprocket gear

Can sprocket gears be used in precision motion control systems?

Yes, sprocket gears can be used in precision motion control systems, but there are some considerations to keep in mind. Precision motion control systems require high accuracy, repeatability, and low backlash to achieve precise positioning and movement. Sprocket gears can meet these requirements under certain conditions:

1. Quality Manufacturing: To ensure precision, sprocket gears used in motion control systems must be of high quality and precision-manufactured. They should have accurate tooth profiles and minimal manufacturing defects.

2. Tight Tolerances: Precision motion control systems require sprocket gears with tight tolerances to minimize variations in tooth engagement. This ensures consistent motion and positioning.

3. Low Backlash: Backlash is the amount of clearance between engaged teeth, and it can cause positioning errors in motion control systems. High-quality sprocket gears with proper installation and alignment can help reduce backlash.

4. Proper Lubrication: Lubrication is critical for reducing friction and wear in precision motion control systems. Using the right lubricant in the right amount is essential for smooth and accurate operation.

5. Alignment and Maintenance: Proper alignment during installation and regular maintenance are crucial for preserving the precision of the sprocket gear system. Misalignment or wear can compromise the system's accuracy.

It's important to select sprocket gears that match the specific requirements of the motion control application. While sprocket gears can work well in precision motion control systems, some applications may benefit from other types of gearing systems, such as gear racks or timing belts, depending on the complexity and demands of the motion control task.

Before integrating sprocket gears into a precision motion control system, it's advisable to consult with engineers or experts familiar with both the application's requirements and the capabilities of sprocket gear systems. This will ensure that the selected gearing solution is optimized for precision and reliability in the motion control application.

sprocket gear

What are the different types of sprocket gears and their applications?

Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:

  • 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
  • 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
  • 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
  • 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
  • 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
  • 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
  • 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.

The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.

China OEM Customized Gear Rack Bevel Gear Sprocket Chain Coupling Worm Synchronous Gear Brass Worm Wheels Gear for Transmission Parts  China OEM Customized Gear Rack Bevel Gear Sprocket Chain Coupling Worm Synchronous Gear Brass Worm Wheels Gear for Transmission Parts
editor by Dream 2024-05-07

China manufacturer AISI 4140 Mining Excavator Large Steel Forged Big Segment Large Sprocket CZPT Chain Wheel Gear

Product Description

Key attributes

Other attributes

Applicable Industries

Manufacturing Plant, Machinery Repair Shops, Energy & Mining

 

Weight (KG)

1650

 

Showroom Location

None

 

Video outgoing-inspection

Provided

 

Machinery Test Report

Provided

 

Marketing Type

Hot Product 2571

 

Warranty of core components

1 Year

 

Core Components

Gear

 

Place of CZPT

ZheJiang , China

 

Condition

New

 

Warranty

1.5 years

 

Shape

Ring Gear

 

Standard or Nonstandard

Nonstandard

 

Tooth Profile

Spur

 

Material

Steel

 

Processing

Casting

 

Pressure Angle

20°

 

Brand Name

HangZhou

 

Product Name

custom large diameter alloy steel spur casting large ring gear

 

Application

Cement kiln

 

Gear Machining

Gear milling

 

Module of Gear:

8-120

 

OD For Gear Wheel:

MAX.13 000 mm

 

Height For CZPT

MAX. 1200 mm

 

Certificate

ISO 9001:2015

 

Tolerance

+/-0.01mm

 

Heat treatment

QT

 

Surface Treatment

Surface Hardening or Carburizing and Quenching

 

Packaging and delivery

Packaging Details

Package for Cement kiln custom large diameter ring gear transmission alloy steel spur casting large ring gear is wooden box and adapts to CZPT transport

 

Port

ZheJiang ,HangZhou or Others

 

Supply Ability

Supply Ability

9000 Ton/Tons per Year

 

OUR WORKSHOPS

 

OUR EQUIPMENTS
Technology Process

Material

Carbon steel,Alloy steel

Structure

Forging,casting

Type of gear

spur gear,helical gear,Planetary Gear

Heat treatment

Quenching and tempering

Process 

forging, rough machining, QT, finish machining

Main equipments

hobbing,CNC machine

Module

up to 200

Precision of gear

Grinding ISO Grade 5-7 & Hobbing ISO Grade 8-9

Inspection

Raw material inspection, UT,physical property test,dimension inspect

Application

Mining machinery, mill, kiln and other equipment

OUR CERTIFICATE
OUR CUSTOMER FEEDBACK
CONTACT 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industry
Hardness: Hb190-Hb300
Gear Position: External Gear
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

sprocket gear

How do I calculate the required torque for a sprocket gear setup?

Calculating the required torque for a sprocket gear setup involves considering several factors that influence the torque demand in the system. Here's a step-by-step guide on how to calculate the required torque:

Step 1: Determine the Load: Identify the load or resistance that the sprocket gear setup needs to overcome. This could be the weight of the object being lifted, the force required to move a conveyor belt, or any other application-specific load.

Step 2: Calculate the Torque to Overcome Friction: The sprocket gear system experiences friction losses that must be accounted for in the torque calculation. Frictional torque can be estimated based on the type of bearings used, lubrication, and other factors.

Step 3: Account for Efficiency: No mechanical system is 100% efficient, and some power will be lost due to factors like friction and heat. Take the system's efficiency into account when calculating the required torque.

Step 4: Determine Speed and Angular Velocity: The speed at which the sprocket gear system operates and the angular velocity of the driven sprocket are essential for torque calculation.

Step 5: Use the Torque Calculation Formula: The torque (T) required to drive the sprocket gear system can be calculated using the formula:

T = (Load × Distance) ÷ (2π × Speed)

Where:

Load = Load or resistance on the system (in Newtons, N)

Distance = Radius or effective radius of the driven sprocket (in meters, m)

Speed = Angular speed of the driven sprocket (in radians per second, rad/s)

Step 6: Apply Safety Factor: In real-world applications, it's essential to apply a safety factor to the calculated torque to account for unexpected overloads or variations in the system's performance.

Step 7: Select the Motor or Power Source: Once you have the calculated required torque, choose a motor or power source that can deliver the necessary torque while considering factors like the motor's torque-speed curve and duty cycle.

Keep in mind that sprocket gear systems might have multiple stages with different gear ratios, so the torque calculation might vary for each stage. Additionally, consult with a mechanical engineer or specialist for critical applications or complex setups to ensure accurate torque calculations.

sprocket gear

Can sprocket gears be used in robotics and automation?

Yes, sprocket gears are commonly used in robotics and automation applications due to their versatility, efficiency, and ability to transmit power between parallel shafts. They offer several advantages that make them suitable for various robotic and automation systems:

1. Power Transmission: Sprocket gears are excellent for power transmission in robotics and automation. They allow precise control over the motion and speed of robotic components, making them ideal for tasks that require accurate positioning and timing.

2. High Efficiency: The meshing of teeth between the sprocket gear and the chain results in minimal friction, providing high mechanical efficiency. This is crucial for energy-efficient operation, especially in battery-powered robots or automation systems.

3. Compact Design: Sprocket gear systems are compact and can be integrated into the limited space of robotic joints and other mechanisms. They offer a lightweight solution without compromising strength and durability.

4. Low Noise: When properly lubricated and maintained, sprocket gears produce minimal noise during operation, contributing to quieter robotic and automation systems.

5. High Load-Carrying Capacity: Sprocket gears can handle significant loads, making them suitable for various robotic applications, including heavy lifting, material handling, and industrial automation.

6. Precise Positioning: Sprocket gears enable accurate positioning, which is essential in tasks that require repetitive and precise movements, such as pick-and-place operations and assembly tasks.

7. Easy Customization: Sprocket gears are available in various sizes, types, and materials, allowing for easy customization to meet specific robotic and automation requirements.

8. Reliability: With proper maintenance, sprocket gear systems can provide long-lasting and reliable performance, reducing downtime and maintenance costs in robotic and automation applications.

Overall, sprocket gears play a vital role in the design and operation of robotic systems, enabling precise motion control, high efficiency, and reliable power transmission. Their versatility makes them a popular choice in a wide range of robotic and automation applications across industries.

sprocket gear

Can you explain the working principle of a sprocket gear transmission?

A sprocket gear transmission is a type of power transmission system that uses sprockets and a chain or a belt to transfer rotational motion and power between two or more shafts. The working principle of a sprocket gear transmission involves the following key steps:

  1. Input Shaft: The power input is provided to one of the sprockets, which is mounted on an input shaft. This can be a motor, engine, or any other rotational power source.
  2. Teeth Engagement: The sprockets have evenly spaced teeth that engage with the links of the chain or the teeth of the belt. As the input shaft rotates, it drives the chain or belt by engaging with these teeth.
  3. Chain or Belt Movement: As the input shaft rotates, it causes the chain or belt to move along the sprockets. The chain or belt wraps around the circumference of the sprockets, and the teeth of the sprockets mesh with the links of the chain or the teeth of the belt.
  4. Output Shaft: On the other end of the chain or belt, there is another sprocket mounted on the output shaft. As the chain or belt moves and wraps around the output sprocket, it causes the output shaft to rotate.
  5. Power Transfer: The rotational motion and power from the input shaft are transferred to the output shaft through the chain or belt and the sprockets. The gear ratio between the input and output sprockets determines the speed and torque relationship between the two shafts.

Sprocket gear transmissions are widely used in various applications due to their efficiency, reliability, and ability to transmit power over long distances. They are commonly found in bicycles, motorcycles, industrial machinery, conveyor systems, and many other mechanical systems.

China manufacturer AISI 4140 Mining Excavator Large Steel Forged Big Segment Large Sprocket CZPT Chain Wheel Gear  China manufacturer AISI 4140 Mining Excavator Large Steel Forged Big Segment Large Sprocket CZPT Chain Wheel Gear
editor by Dream 2024-05-06

China supplier High Performance Car Sprocket 13523-31010 Engine Camshaft Timing Gear

Product Description

High Performance Car Sprocket 13523-31571 Engine Camshaft Timing Gear

 

Product Specification: 

OEM No: 13523-31571
Apply To:

for Car

Brand: FENGMING 
Condition: Brand New
Stock Availability: Yes
Minimum Order QTY 10PCS
OEM Order Acceptability: Yes
Small order Lead Time: 3-7 days
Large Order Lead Time: 15-30 days
Quality Warranty half year
PACKAGING As nuetral or as customer's request, FENG MING PACKING
Payment Methods: Paypal, Western Union, Bank T/T, L/C
Shipment Methods: DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Timing Gear
Material: Steel
Certification: ISO
Automatic: Automatic
Standard: Standard
Condition: New
Samples:
US$ 7.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

How do I properly install and align sprocket gears?

Proper installation and alignment of sprocket gears are crucial to ensure smooth and efficient power transmission and to prevent premature wear. Here are the steps to properly install and align sprocket gears:

1. Gather the Required Tools:

Before starting the installation process, gather all the necessary tools, including a torque wrench, measuring tools (calipers or micrometers), leveling tools, and alignment tools.

2. Clean the Components:

Thoroughly clean the sprocket gears and the shafts on which they will be mounted. Remove any dirt, debris, or old lubricant to ensure proper contact between the components.

3. Check for Damage:

Inspect the sprocket gears for any signs of damage, wear, or deformation. If any issues are found, replace the damaged components before proceeding.

4. Ensure Proper Fit:

Ensure that the bore diameter of the sprocket gear matches the diameter of the shaft on which it will be mounted. The fit should be neither too loose nor too tight, and the keyway (if present) should align properly with the key on the shaft.

5. Align Sprocket Gears:

For chain and sprocket systems, align the sprocket gears precisely with each other. The teeth of the driving and driven sprockets should mesh smoothly with the chain. For belt drive systems, ensure the sprocket gears align with each other and the belt tracks properly within the sprockets.

6. Check Axial Alignment:

Ensure that the sprocket gears are axially aligned with each other and perpendicular to their respective shafts. Any misalignment can cause premature wear and noise during operation.

7. Set Tension:

If using a chain and sprocket system, adjust the tension of the chain to the manufacturer's specifications. Proper tension ensures optimal power transmission and extends the life of both the chain and sprocket gears.

8. Lubricate:

Apply the appropriate lubricant to the sprocket gear teeth and the chain or belt as required. Lubrication reduces friction, heat, and wear during operation.

9. Torque Fasteners:

If the sprocket gears are held in place with fasteners (such as set screws or bolts), torque them to the recommended specifications. This ensures that the sprocket gears are securely attached to the shafts and will not slip during operation.

10. Perform a Trial Run:

After installation, run the system at low speed and observe its performance. Check for any unusual noise, vibration, or misalignment. If any issues are detected, stop the system immediately and address the problem.

Following these steps will help ensure that the sprocket gears are properly installed and aligned, leading to reliable and efficient power transmission in your mechanical system.

sprocket gear

How do I identify the signs of wear and tear in a sprocket gear?

Regular inspection of sprocket gears is essential to identify signs of wear and tear early on and prevent potential issues that could lead to system failure or reduced performance. Here are some common signs to look for when inspecting sprocket gears:

1. Tooth Wear: Examine the teeth of the sprocket for signs of wear. Wear can manifest as rounding of the tooth profile or a reduction in tooth height. Excessive wear can lead to poor engagement with the chain, resulting in chain skipping and decreased efficiency.

2. Surface Damage: Check the surface of the sprocket teeth for any signs of chipping, cracking, or pitting. Surface damage can occur due to foreign particles, misalignment, or inadequate lubrication.

3. Chain Stretch: Measure the chain's length to check for elongation or stretch. A stretched chain can cause uneven wear on the sprocket teeth and affect the overall performance of the system.

4. Looseness: Inspect the sprocket for any signs of looseness or play. A loose sprocket can lead to noise, vibration, and premature wear of both the sprocket and the chain.

5. Corrosion: If the sprocket is exposed to corrosive environments, check for signs of rust or corrosion. Corrosion can weaken the sprocket and reduce its load-carrying capacity.

6. Lubrication: Evaluate the condition of the lubricant and ensure the sprocket is adequately lubricated. Insufficient lubrication can accelerate wear and cause friction-related issues.

Regular maintenance and lubrication can help extend the life of sprocket gears and prevent premature wear. If any signs of wear and tear are detected during the inspection, it is crucial to address the issue promptly. Depending on the severity of the wear, repair or replacement of the sprocket gear may be necessary to ensure the proper functioning and safety of the system.

sprocket gear

Are there any eco-friendly materials used in manufacturing sprocket gears?

Yes, there are eco-friendly materials used in manufacturing sprocket gears. As industries increasingly prioritize sustainability and environmental consciousness, manufacturers have developed alternative materials that reduce the ecological impact of sprocket gear production. Some eco-friendly materials commonly used in sprocket gear manufacturing include:

  • Bio-Based Plastics: Certain sprocket gears are now made from bio-based plastics, which are derived from renewable resources like plant-based polymers. These plastics offer similar performance to traditional materials while being more sustainable and biodegradable.
  • Recycled Metals: Sprocket gears can be manufactured using recycled metals, such as recycled steel or aluminum. Recycling metals helps conserve natural resources and reduces energy consumption during the manufacturing process.
  • Biodegradable Lubricants: While not a direct material for sprocket gears, using biodegradable lubricants for sprocket gear systems can contribute to environmental sustainability. These lubricants break down more easily in the environment, reducing pollution risks.
  • Composite Materials: Composite materials that combine natural fibers with resins or polymers are being explored for sprocket gear applications. These composites can be more eco-friendly due to their renewable content.

It's important to note that the specific materials used in sprocket gear manufacturing may vary depending on the application, load requirements, and environmental conditions. Manufacturers and end-users should consider factors like performance, durability, and cost-effectiveness alongside the eco-friendliness of the materials when choosing the right sprocket gear for their needs.

China supplier High Performance Car Sprocket 13523-31010 Engine Camshaft Timing Gear  China supplier High Performance Car Sprocket 13523-31010 Engine Camshaft Timing Gear
editor by Dream 2024-05-06

China Custom Automatic Transmission Conveyor Gearbox Parts Roller Chains Conveyor Chain Driving Chain Gear Travelling Belt Sprocket Grate Motorcycle Transmission Gear

Product Description

SPROCKET  1/2'' X 5/16''  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An "H" following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, "10 speed chain". Hub gear or single speed bicycles use 1/2" x 1/8" chains, where 1/8" refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

Can sprocket gears be used for heavy-duty applications in industrial machinery?

Yes, sprocket gears are commonly used in heavy-duty applications in various industrial machinery. Their robust design, high load-carrying capacity, and reliable power transmission make them well-suited for demanding industrial environments. Some of the key reasons sprocket gears are preferred for heavy-duty applications include:

1. Strength and Durability: Sprocket gears are typically made from strong and durable materials, such as hardened steel or cast iron. This allows them to withstand heavy loads and high torques without deformation or failure.

2. High Load Capacity: The tooth profile of sprocket gears, especially those with involute teeth, distributes the load evenly across the gear teeth, enabling them to handle substantial forces and transmit power efficiently.

3. Versatility: Sprocket gears can be designed in various configurations, such as single, double, or triple-strand setups, to accommodate different load requirements. They can also be used in combination with multiple sprockets and chains to create complex power transmission systems.

4. Effective Power Transmission: Sprocket gears provide reliable power transmission with minimal slippage or backlash. This is crucial in heavy-duty machinery, where precision and consistency are essential for optimal performance.

5. Easy Maintenance: Sprocket gears are relatively easy to maintain, as they can be individually replaced if worn or damaged. This reduces downtime and maintenance costs in industrial settings.

6. Adaptability: Sprocket gears can be used with various types of chains, such as roller chains, silent chains, or specialty chains, allowing for adaptation to different industrial applications.

7. Cost-Effective Solution: Considering their durability and long lifespan, sprocket gears offer a cost-effective solution for heavy-duty applications in industrial machinery.

Common examples of heavy-duty industrial machinery that use sprocket gears include conveyor systems, agricultural equipment, mining machinery, construction machinery, and manufacturing equipment.

It is important to select the appropriate sprocket gear size, material, and tooth configuration based on the specific requirements of the machinery and the operating conditions to ensure reliable and efficient performance in heavy-duty industrial applications.

sprocket gear

How do I identify the signs of wear and tear in a sprocket gear?

Regular inspection of sprocket gears is essential to identify signs of wear and tear early on and prevent potential issues that could lead to system failure or reduced performance. Here are some common signs to look for when inspecting sprocket gears:

1. Tooth Wear: Examine the teeth of the sprocket for signs of wear. Wear can manifest as rounding of the tooth profile or a reduction in tooth height. Excessive wear can lead to poor engagement with the chain, resulting in chain skipping and decreased efficiency.

2. Surface Damage: Check the surface of the sprocket teeth for any signs of chipping, cracking, or pitting. Surface damage can occur due to foreign particles, misalignment, or inadequate lubrication.

3. Chain Stretch: Measure the chain's length to check for elongation or stretch. A stretched chain can cause uneven wear on the sprocket teeth and affect the overall performance of the system.

4. Looseness: Inspect the sprocket for any signs of looseness or play. A loose sprocket can lead to noise, vibration, and premature wear of both the sprocket and the chain.

5. Corrosion: If the sprocket is exposed to corrosive environments, check for signs of rust or corrosion. Corrosion can weaken the sprocket and reduce its load-carrying capacity.

6. Lubrication: Evaluate the condition of the lubricant and ensure the sprocket is adequately lubricated. Insufficient lubrication can accelerate wear and cause friction-related issues.

Regular maintenance and lubrication can help extend the life of sprocket gears and prevent premature wear. If any signs of wear and tear are detected during the inspection, it is crucial to address the issue promptly. Depending on the severity of the wear, repair or replacement of the sprocket gear may be necessary to ensure the proper functioning and safety of the system.

sprocket gear

Are there any eco-friendly materials used in manufacturing sprocket gears?

Yes, there are eco-friendly materials used in manufacturing sprocket gears. As industries increasingly prioritize sustainability and environmental consciousness, manufacturers have developed alternative materials that reduce the ecological impact of sprocket gear production. Some eco-friendly materials commonly used in sprocket gear manufacturing include:

  • Bio-Based Plastics: Certain sprocket gears are now made from bio-based plastics, which are derived from renewable resources like plant-based polymers. These plastics offer similar performance to traditional materials while being more sustainable and biodegradable.
  • Recycled Metals: Sprocket gears can be manufactured using recycled metals, such as recycled steel or aluminum. Recycling metals helps conserve natural resources and reduces energy consumption during the manufacturing process.
  • Biodegradable Lubricants: While not a direct material for sprocket gears, using biodegradable lubricants for sprocket gear systems can contribute to environmental sustainability. These lubricants break down more easily in the environment, reducing pollution risks.
  • Composite Materials: Composite materials that combine natural fibers with resins or polymers are being explored for sprocket gear applications. These composites can be more eco-friendly due to their renewable content.

It's important to note that the specific materials used in sprocket gear manufacturing may vary depending on the application, load requirements, and environmental conditions. Manufacturers and end-users should consider factors like performance, durability, and cost-effectiveness alongside the eco-friendliness of the materials when choosing the right sprocket gear for their needs.

China Custom Automatic Transmission Conveyor Gearbox Parts Roller Chains Conveyor Chain Driving Chain Gear Travelling Belt Sprocket Grate Motorcycle Transmission Gear  China Custom Automatic Transmission Conveyor Gearbox Parts Roller Chains Conveyor Chain Driving Chain Gear Travelling Belt Sprocket Grate Motorcycle Transmission Gear
editor by Dream 2024-05-03

China Good quality Standard Carbon Steel Spur Gear Sprocket From China Manufacturer

Product Description

Standard carbon steel spur gear from from China manufacturer SCS

With more than 20 years' experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.

Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Forging Parts
Material: 45# Steel
Teeth: 9t-120t
Samples:
US$ 9.99/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

What are the noise and vibration levels associated with sprocket gear systems?

The noise and vibration levels associated with sprocket gear systems can vary depending on several factors. Here are some key points to consider regarding noise and vibration:

1. Gear Design: The design of the sprocket gears, including the number of teeth, pitch, and tooth profile, can influence noise and vibration levels. Gears with irregular tooth profiles or incorrect meshing can generate higher levels of noise and vibration.

2. Gear Material: The material used for manufacturing the sprocket gears can impact noise and vibration. High-quality gears made from materials with good damping properties can help reduce vibrations and noise during operation.

3. Lubrication: Proper lubrication is essential for reducing friction and wear between gear teeth. Inadequate or improper lubrication can lead to increased noise and vibration levels due to metal-to-metal contact.

4. Alignment: Misalignment between the sprocket gears can cause uneven loading and increased noise. Proper alignment ensures smooth and efficient power transmission, minimizing noise and vibration.

5. Load Distribution: Uniform load distribution among the gear teeth is crucial for smooth operation. Uneven loads can lead to noise and vibration issues.

6. Gear Condition: Wear and damage to the gear teeth over time can result in increased noise and vibration. Regular inspection and maintenance are necessary to address any wear-related issues promptly.

7. Operating Speed: Higher operating speeds can increase noise and vibration levels, especially if the gears are not properly balanced and aligned.

8. Housing and Mounting: The design and construction of the gear housing and mounting can affect noise transmission. A well-designed housing can help dampen noise and prevent vibrations from spreading to other parts of the machinery.

9. Operating Environment: The operating environment, such as temperature and humidity, can influence gear performance and noise levels.

Sprocket gear systems can be engineered and maintained to minimize noise and vibration levels. Using high-quality materials, proper lubrication, correct alignment, and regular maintenance can significantly reduce noise and vibration, ensuring smooth and efficient operation of the machinery.

sprocket gear

Can sprocket gears be used in precision motion control systems?

Yes, sprocket gears can be used in precision motion control systems, but there are some considerations to keep in mind. Precision motion control systems require high accuracy, repeatability, and low backlash to achieve precise positioning and movement. Sprocket gears can meet these requirements under certain conditions:

1. Quality Manufacturing: To ensure precision, sprocket gears used in motion control systems must be of high quality and precision-manufactured. They should have accurate tooth profiles and minimal manufacturing defects.

2. Tight Tolerances: Precision motion control systems require sprocket gears with tight tolerances to minimize variations in tooth engagement. This ensures consistent motion and positioning.

3. Low Backlash: Backlash is the amount of clearance between engaged teeth, and it can cause positioning errors in motion control systems. High-quality sprocket gears with proper installation and alignment can help reduce backlash.

4. Proper Lubrication: Lubrication is critical for reducing friction and wear in precision motion control systems. Using the right lubricant in the right amount is essential for smooth and accurate operation.

5. Alignment and Maintenance: Proper alignment during installation and regular maintenance are crucial for preserving the precision of the sprocket gear system. Misalignment or wear can compromise the system's accuracy.

It's important to select sprocket gears that match the specific requirements of the motion control application. While sprocket gears can work well in precision motion control systems, some applications may benefit from other types of gearing systems, such as gear racks or timing belts, depending on the complexity and demands of the motion control task.

Before integrating sprocket gears into a precision motion control system, it's advisable to consult with engineers or experts familiar with both the application's requirements and the capabilities of sprocket gear systems. This will ensure that the selected gearing solution is optimized for precision and reliability in the motion control application.

sprocket gear

What are the common problems faced with sprocket gears and how to troubleshoot them?

Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:

  • 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
  • Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
  • 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
  • Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
  • 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
  • Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
  • 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
  • Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
  • 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
  • Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application's load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.

It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.

China Good quality Standard Carbon Steel Spur Gear Sprocket From China Manufacturer  China Good quality Standard Carbon Steel Spur Gear Sprocket From China Manufacturer
editor by Dream 2024-05-03

China Best Sales Standard Carbon Steel Spur Gear Sprocket From China Manufacturer

Product Description

Standard carbon steel spur gear from from China manufacturer SCS

With more than 20 years' experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.

Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Forging Parts
Material: 45# Steel
Teeth: 9t-120t
Samples:
US$ 9.99/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

How do I calculate the required torque for a sprocket gear setup?

Calculating the required torque for a sprocket gear setup involves considering several factors that influence the torque demand in the system. Here's a step-by-step guide on how to calculate the required torque:

Step 1: Determine the Load: Identify the load or resistance that the sprocket gear setup needs to overcome. This could be the weight of the object being lifted, the force required to move a conveyor belt, or any other application-specific load.

Step 2: Calculate the Torque to Overcome Friction: The sprocket gear system experiences friction losses that must be accounted for in the torque calculation. Frictional torque can be estimated based on the type of bearings used, lubrication, and other factors.

Step 3: Account for Efficiency: No mechanical system is 100% efficient, and some power will be lost due to factors like friction and heat. Take the system's efficiency into account when calculating the required torque.

Step 4: Determine Speed and Angular Velocity: The speed at which the sprocket gear system operates and the angular velocity of the driven sprocket are essential for torque calculation.

Step 5: Use the Torque Calculation Formula: The torque (T) required to drive the sprocket gear system can be calculated using the formula:

T = (Load × Distance) ÷ (2π × Speed)

Where:

Load = Load or resistance on the system (in Newtons, N)

Distance = Radius or effective radius of the driven sprocket (in meters, m)

Speed = Angular speed of the driven sprocket (in radians per second, rad/s)

Step 6: Apply Safety Factor: In real-world applications, it's essential to apply a safety factor to the calculated torque to account for unexpected overloads or variations in the system's performance.

Step 7: Select the Motor or Power Source: Once you have the calculated required torque, choose a motor or power source that can deliver the necessary torque while considering factors like the motor's torque-speed curve and duty cycle.

Keep in mind that sprocket gear systems might have multiple stages with different gear ratios, so the torque calculation might vary for each stage. Additionally, consult with a mechanical engineer or specialist for critical applications or complex setups to ensure accurate torque calculations.

sprocket gear

What are the load-carrying capacities of different sprocket gear configurations?

Load-carrying capacity is a critical factor to consider when selecting a sprocket gear configuration for a specific application. The load-carrying capacity of a sprocket gear depends on various factors, including the material and design of the sprocket, the size and number of teeth, and the type of chain used in conjunction with the sprocket.

Here are some factors that influence the load-carrying capacities of different sprocket gear configurations:

1. Material: The choice of material significantly impacts the load-carrying capacity of the sprocket gear. High-strength materials, such as hardened steel or alloy materials, are often used for heavy-duty applications, as they can withstand higher loads without deformation or failure.

2. Number of Teeth: Sprocket gears with more teeth typically distribute the load over a larger surface area, which can improve their load-carrying capacity. However, an increase in the number of teeth may also lead to higher friction losses in the system.

3. Tooth Profile: The shape of the sprocket gear teeth, such as standard or modified tooth profiles, can affect the load distribution and efficiency of the gear system.

4. Chain Type: The type of chain used with the sprocket gear is crucial in determining the overall load-carrying capacity of the system. Different chain designs, such as roller chains or silent chains, have varying load-carrying capabilities.

It is essential to consult the manufacturer's specifications and engineering data when determining the load-carrying capacity of a particular sprocket gear configuration. Additionally, factors like the speed of operation, environmental conditions, and duty cycle should also be considered to ensure the sprocket gear is appropriately sized for the application.

In heavy-duty and high-load applications, engineers often conduct detailed calculations and simulations to ensure the sprocket gear system can handle the required loads safely and reliably. Proper maintenance and periodic inspections are essential to preserve the load-carrying capacity and extend the life of the sprocket gear system.

sprocket gear

What lubrication practices are recommended for sprocket gears?

Proper lubrication is crucial for the efficient and reliable operation of sprocket gears. The lubricant used should reduce friction, minimize wear, dissipate heat, and protect against corrosion. Here are some recommended lubrication practices for sprocket gears:

1. Lubricant Selection: Choose a high-quality lubricant specifically designed for sprocket gears. Look for lubricants with high film strength and anti-wear additives to protect the gear teeth from excessive wear and extend the sprocket's lifespan.

2. Lubrication Frequency: Regularly lubricate the sprocket gears as per the manufacturer's guidelines or equipment maintenance schedule. The frequency of lubrication depends on factors such as operating conditions, load, and environmental factors.

3. Cleanliness: Before applying new lubricant, ensure that the sprocket gears are clean and free from debris, dirt, and old lubricant. Clean the gears using a suitable solvent or cleaning agent to maximize the effectiveness of the new lubricant.

4. Proper Application: Apply the lubricant evenly and adequately to all the teeth of the sprocket gear. Ensure that the lubricant reaches the contact points between the teeth to form a protective film and reduce metal-to-metal contact.

5. Avoid Over-Lubrication: Applying excessive lubricant can lead to overheating and attract more dirt and debris, potentially causing damage to the gears. Follow the recommended lubrication quantities to avoid over-lubrication.

6. Re-Lubrication: In high-temperature or heavy-duty applications, the lubricant may degrade faster. Regularly monitor the sprocket gears for signs of insufficient lubrication, and re-lubricate as necessary.

7. Temperature Considerations: In environments with extreme temperatures, choose a lubricant with a suitable temperature range to ensure its effectiveness under those conditions.

8. Maintenance Records: Keep detailed records of the lubrication schedule, type of lubricant used, and any observations of unusual wear or performance issues. This information will help identify trends and potential problems early.

9. Inspections: Regularly inspect the sprocket gears for signs of wear, pitting, or abnormal damage. Early detection of issues allows for timely maintenance and prevents severe damage to the sprocket system.

10. Training: Ensure that personnel responsible for lubrication practices are adequately trained to apply the lubricant correctly and safely.

Following these lubrication practices will help maximize the efficiency, performance, and lifespan of sprocket gears in various mechanical systems.

China Best Sales Standard Carbon Steel Spur Gear Sprocket From China Manufacturer  China Best Sales Standard Carbon Steel Spur Gear Sprocket From China Manufacturer
editor by Dream 2024-05-02

China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer

Product Description

Standard carbon steel spur gear from from China manufacturer SCS

With more than 20 years' experience, high-precision equipment and strict management system, CZPT can provide sprockets, gears, shafts, flanges and related transmission parts for you with stable quality and best service.

Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or EUR), or samples.
Q2: Are you a trading company or factory?
A: CZPT is a factory located in HangZhou, ZheJiang .
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, CZPT has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: Is there any customer that has assessed your quality management system?
A:Yes, CZPT has passed the audit of many customers, such as Mitsubishi, CLAAS, Kardex and so on.
Q6: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic CZPT steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the CZPT number of steel will be well-managed in our ERP system to ensure the traceablity of our products.
Q7: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.
Q8: What are your terms of delivery?
A: EXW, FOB ZheJiang .
Q9: How about your lead time?
A: Normally it will take 45 days after receiving your advance payment. The specific lead time depends on the items and the quantity of your order.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Forging Parts
Material: 45# Steel
Teeth: 9t-120t
Samples:
US$ 9.99/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

What are the noise and vibration levels associated with sprocket gear systems?

The noise and vibration levels associated with sprocket gear systems can vary depending on several factors. Here are some key points to consider regarding noise and vibration:

1. Gear Design: The design of the sprocket gears, including the number of teeth, pitch, and tooth profile, can influence noise and vibration levels. Gears with irregular tooth profiles or incorrect meshing can generate higher levels of noise and vibration.

2. Gear Material: The material used for manufacturing the sprocket gears can impact noise and vibration. High-quality gears made from materials with good damping properties can help reduce vibrations and noise during operation.

3. Lubrication: Proper lubrication is essential for reducing friction and wear between gear teeth. Inadequate or improper lubrication can lead to increased noise and vibration levels due to metal-to-metal contact.

4. Alignment: Misalignment between the sprocket gears can cause uneven loading and increased noise. Proper alignment ensures smooth and efficient power transmission, minimizing noise and vibration.

5. Load Distribution: Uniform load distribution among the gear teeth is crucial for smooth operation. Uneven loads can lead to noise and vibration issues.

6. Gear Condition: Wear and damage to the gear teeth over time can result in increased noise and vibration. Regular inspection and maintenance are necessary to address any wear-related issues promptly.

7. Operating Speed: Higher operating speeds can increase noise and vibration levels, especially if the gears are not properly balanced and aligned.

8. Housing and Mounting: The design and construction of the gear housing and mounting can affect noise transmission. A well-designed housing can help dampen noise and prevent vibrations from spreading to other parts of the machinery.

9. Operating Environment: The operating environment, such as temperature and humidity, can influence gear performance and noise levels.

Sprocket gear systems can be engineered and maintained to minimize noise and vibration levels. Using high-quality materials, proper lubrication, correct alignment, and regular maintenance can significantly reduce noise and vibration, ensuring smooth and efficient operation of the machinery.

sprocket gear

What are the load-carrying capacities of different sprocket gear configurations?

Load-carrying capacity is a critical factor to consider when selecting a sprocket gear configuration for a specific application. The load-carrying capacity of a sprocket gear depends on various factors, including the material and design of the sprocket, the size and number of teeth, and the type of chain used in conjunction with the sprocket.

Here are some factors that influence the load-carrying capacities of different sprocket gear configurations:

1. Material: The choice of material significantly impacts the load-carrying capacity of the sprocket gear. High-strength materials, such as hardened steel or alloy materials, are often used for heavy-duty applications, as they can withstand higher loads without deformation or failure.

2. Number of Teeth: Sprocket gears with more teeth typically distribute the load over a larger surface area, which can improve their load-carrying capacity. However, an increase in the number of teeth may also lead to higher friction losses in the system.

3. Tooth Profile: The shape of the sprocket gear teeth, such as standard or modified tooth profiles, can affect the load distribution and efficiency of the gear system.

4. Chain Type: The type of chain used with the sprocket gear is crucial in determining the overall load-carrying capacity of the system. Different chain designs, such as roller chains or silent chains, have varying load-carrying capabilities.

It is essential to consult the manufacturer's specifications and engineering data when determining the load-carrying capacity of a particular sprocket gear configuration. Additionally, factors like the speed of operation, environmental conditions, and duty cycle should also be considered to ensure the sprocket gear is appropriately sized for the application.

In heavy-duty and high-load applications, engineers often conduct detailed calculations and simulations to ensure the sprocket gear system can handle the required loads safely and reliably. Proper maintenance and periodic inspections are essential to preserve the load-carrying capacity and extend the life of the sprocket gear system.

sprocket gear

What are the common problems faced with sprocket gears and how to troubleshoot them?

Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:

  • 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
  • Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
  • 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
  • Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
  • 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
  • Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
  • 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
  • Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
  • 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
  • Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application's load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.

It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.

China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer  China Custom Standard Carbon Steel Spur Gear Sprocket From China Manufacturer
editor by Dream 2024-05-02