China Foundry Custom Made Ductile Iron Gray Iron Sand Casting Sprocket with Machining sprocket bushing

Product Description

COMPANY INTRODUCTION

HangZhou Worth Engineering Technology Co., Ltd. founded in 2001 , Company is located in the Chinese ancient city --- HangZhou. Our company has been engaged in producing custom made engineering accessories, OEM/ODM spare parts and industrial components for many years, including CZPT parts and investment casting spare parts, forging parts, sheet metal stamping spare parts, machined parts and plastic parts, which are widely used in petrochemical, automobile, chemical, environmental protection , machinery, construction, agriculture, aerospace, marine hardware and other industries.
 

 

GRAY IRON/DUCTILE IRON/CARBON STEEL/ALLOY STEEL SAND CASTING
 

Sand casting accessories and cnc machining part for engine, refrigerator and air conditioner, fan, compressor, pump, flange, washer, coupling, gearbox case, shaft, valve and strainer, tractor, automotive, motor rotor, electronic case, computer,  water treatment equipment. Weight of products range from 0.5kgs to 10tons. The usually used materials are ductile iron, gray iron, high chrome iron, many kinds of steel, brass, copper, aluminum and wear resistant material, etc.
Process: sand casting+cnc machining+deburrs
Tolerance: +/-0.05mm
Surface: deburrs,degrease,chamfer
Service available: OEM & ODM
Quality control: 0 defects,100% inspection before packing
Delivery time: 30 days after confirm the drawing
Packing:   Inner:bubble poly bag; Outer:5 layers ctn box or poly wooden box/pallet
Logistics service:  sea,air,express,EXW,FOB,CIF,DDU,DDP

Warranty:   100% refund or replacement for NOK pcs

Our Services

1, R&D service                       2, Drawing design service
3, Samples service                  4, Bulk production service
5, Inspection service               6, Packing&shipping service

Packaging & Shipping

1.Packing: 
Inside:bubble bag
Outside:carton case or poly wooden case
2.Shipping: 
Small batch by courier, large batch by sea or air

Certifications

1. ISO9001-2008
2. SGS
3. Material Certificate
4. CIQ...

Company Capabilities:

(1).CNC machining parts
(2).The fabrication
(3).The mechanical assemble
(4).The Surface treatment

Plating :3+Cr,environmental,anti-corrosion maximum 480 hours salt spray test
Coating:powder coating,electrcial coating,maximum 480 hours salt spray test
Painting:environmental EXPOSY painting,cross-cutting test
Polish:satin polish,mirror polish,electrical polish, maximum 1200 grid
Dacromet:evironmental,anti-corrosion,maximum 560 hours salt spary test
Anodization:tumble,shot blast,sand blast.....,various color,maximum 480 hours salt spray test
Nylok:tight-locking,environmental,5 million times
Heat Treatment:adjust the mechanical properties,temper,normalization,quench......
(5).The Variousl Material
stainless steel:SS304,SS304L,SS316,SS316L,SS430,SS201......
aluminium:7075,6061,6063,5082,5051,2014.......
brass:H62,H58,H59......
steel:C20,C45,C60,C35......
steel alloy:25CrMo,42CrMo,25Cr,40Cr,Q345,11SMn30......
iron cast:QT600,QT250,HT450,HT150......
titanium alloy:GR2,GR5,GR7,GR9......
tungsten alloy:WuNiFe alloy,Carbide Wolfram......
the blanks:stamping parts,forging parts,die casting parts,profile,extrusion......

the plastic:PP,PE,POM,Acrylic,ABS,Delrin......

 

COMPANY EQUIPMENTS


TESTING FAXIHU (WEST LAKE) DIS.TIES


THE PACKAGE AND SHIPMENT

CUSTOMERS

 

FAQ
 

Q1. How to customize products?                                                                                                
A2: Attach your drawings with details (material, surface treatment, quantity and special requirements etc).    

Q2: Can you make the parts based on the sample?
A3: Yes, we could provide a rough cost and will measure and design the drawing according your sample.

Q3: Can my design be safe after sending it to you?
A5: We can CZPT the NDA before you send it.
                                                                                                                                                                                                   
Q4. How long will it take to get the quotation?                                                                       
A6: We will give you the quotation within 24 hours (Considering the time difference).    
         
Q5. How does the company control the quality?                                                                  
A7: Inspection product with professional equipment , like CMM, height gauge, caliper & micrometer,quadratic equipment .

 


/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Chemical Hardening Sand
Casting Method: Directional Crystallization
Sand Core Type: Sodium Silicate Sand Core
Application: Auto Parts
Machining: CNC Machining
Material: Steel

###

Customization:
Available

|



/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Chemical Hardening Sand
Casting Method: Directional Crystallization
Sand Core Type: Sodium Silicate Sand Core
Application: Auto Parts
Machining: CNC Machining
Material: Steel

###

Customization:
Available

|


How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
sprocket

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we'll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you're buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle's chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket's teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer's maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don't use oil as it doesn't protect the chain from water and is more viscous.

China Foundry Custom Made Ductile Iron Gray Iron Sand Casting Sprocket with Machining     sprocket bushingChina Foundry Custom Made Ductile Iron Gray Iron Sand Casting Sprocket with Machining     sprocket bushing
editor by CX2023-03-29